Hot selling OMR of OMR50 OMR80 OMR100 OMR125 OMR160 OMR200 OMR250 OMR315 OMR375 orbit hydraulic motor

Hot selling OMR of OMR50,OMR80,OMR100,OMR125,OMR160,OMR200,OMR250,OMR315,OMR375 orbit hydraulic motor

Advanced design of distribution shaft and stator and rotor, small volume and compact structure.
Reliable shaft seal design, can bear high back pressure, can be used in series and parallel.
The forward and reverse conversion is convenient and the rotation speed is stable.
High efficiency, economic and reliable, used in low and medium load situations.
A variety of output shaft, flange, oil port and other connection forms.

1. Intermittent refers to the maximum pressure at the inlet, and continuous working pressure refers to the working pressure difference.
2. The motor shall not work at the highest pressure and speed at the same time.
3. Under intermittent working conditions, the running time of motor shall not exceed 10%.
4. The maximum working temperature is 80 °.
5. The maximum allowable back pressure of the motor is 10MPa, but it is recommended that the back pressure should not be more than 5MPa. If it is more than 5MPa, an external oil drain pipe should be connected.
6. before the motor works at full load, it is recommended to run in 1 hours below 40% of the maximum working pressure.
7. 68 × anti-wear hydraulic oil with viscosity of 37-73cst and cleanliness of iso18 / 13 is recommended.