Product Details

Open Circuit LRR KRR LRR025 LRR030 KRR038 KRR045 LRL025 LRL030 KRL038 KRL045 Hydraulic Sauer danfoss Open Circuit Pump

Brand Name Sauer danforss, Sauer Denison
Place of Origin Fujian, China
Type Fittings, piston pump

Product Features

Open Circuit LRR KRR LRR025 LRR030 KRR038 KRR045 LRL025 LRL030 KRL038 KRL045 Hydraulic Sauer danfoss Open Circuit Pump

FRR090C FRL074B FRL090C FRL Sauer FRR Pump. FRR074 FRR090 FRL074 FRL090 future below:
variable displacement, axial piston pumps for open circuit applications. Each frame within the Series 45 family is uniquely
designed to optimize performance, size, and cost, matching the work function requirements of the demanding mobile equipment
marketplace.
Details regarding the choice of hydraulic fluid:
The correct choice of hydraulic fluid requires knowledge of the operating temperature in relation to the ambient temperature: in a
closed circuit the circuit temperature.
The hydraulic fluid should be chosen so that the operating viscosity in the operating temperature range is within the optimum
range (νopt)
- the shaded area of the selection diagram. We recommended that the higher viscosity class be selected in each case.
Example: At an ambient temperature of X °C an operating temperature of 60 °C is set. In the optimum operating viscosity range
(νopt; shaded area) this corresponds to the viscosity classes VG 46 or VG 68; to be selected: VG 68. Please note: The case drain
temperature, which is affected by pressure and speed, is always higher than the circuit temperature.
At no point in the system may the temperature be higher than 115 °C. If the above conditions cannot be maintained due to extreme
operating parameters, please consult us.
Hydraulic fluid; Before starting project planning, please refer to our data sheets RE 90220 (mineral oil), RE 90221
(environmentally acceptable hydraulic fluids) and RE 90223 (HF hydraulic fluids) for detailed information regarding the choice of
hydraulic fluid and application conditions. The variable pump A4VG is unsuitable for operation with HFA, HFB and HFC. If HFD or
environmentally acceptable hydraulic fluids are being used, the limitations regarding technical data and seals mentioned in RE
90221 and RE 90223 must be observed. When ordering, please indicate the used hydraulic fluid.

Charge pump
Hydraulic pump parts
Hydraulic pump
Cylinder block
Press pin
Piston motor
Piston shoe
Snap ring
Piston pump
Retainer plate
Coil spring
Gear pump
Ball guide
Disk spring
Charge pump
Valve plate
Barrel washer
Pilot pump
Shoe plate
Oil seal
Vane pump
Bearing plate
Frication plate
Repair OEM parts
Swash plate
Steel plate
Motor spare parts
Drive shaft
Metal
1.Be of long standing factory built in 1986
2.USA professional engineer and with 5 utility models and 5 patents
3.GRH OEM and with 370 professional employees, 4 work shops total 22000 square meters
4.208 pcs machanical and test equipments
5.100% factory testing and inspection personnel in accordance with international standards for the high-frequency sampling,to
ensure the quality of products manufactured
6.become TEREX,JOHN DEERE, HYDAC,AGCO,EATON ,NEW HOLLAND ,GARONER DENVER and MAHINDRA supplier

You May Like

Find Similar Products By Category

You May Like

View More
Chat Now Contact Now