Trade Assurance replace Dension hydraulic pump PV20-2R1D-C00-J343 PV29-1R1D-C02 PV47-2R1D-C02-000 PV15-1R5D-C00 PV6 PV15 PV20

Trade Assurance replace Denison  hydraulic pump PV20-2R1D-C00-J343 PV29-1R1D-C02 PV47-2R1D-C02-000 PV15-1R5D-C00 PV6 PV15 PV20 

High working pressure - rated working pressure up to 275 bar, which reduces the size of hydraulic actuators, hydraulic control valves and piping, reducing installation costs. If the working pressure is reduced, the working life can be extended;
High volumetric efficiency - typical volumetric efficiency of 0.94, high volumetric efficiency even under load, which increases productivity, reduces heat generation and reduces operating costs of hydraulic equipment, and allows for full-pressure operating conditions As low as 600 rpm (vehicle pumps can be as low as 400 rpm);
High mechanical efficiency - typically 0.94, reducing energy loss;
Wide range of speeds - 600 to 2800 rpm (400 to 2800 rpm for automotive pumps), combined with a large displacement pump assembly in a small size housing to optimize operating conditions and reduce noise;
Low speed (600 rpm, 400 rpm for automotive pumps), low pressure and high viscosity (860 cSt, 2000 cSt for automotive pumps) - Ability to adapt T6 series vane pumps to low temperature conditions with low power consumption No danger of stuck;
The pressure pulsation is small - about ±2 bar, which reduces the noise of the hydraulic piping and extends the service life of other components in the hydraulic circuit;
Low noise - increases work safety and increases acceptance.
Strong anti-pollution ability - This series of pumps adopts double-lip structure blades, which have strong anti-pollution ability and long service life;
Optional structural parameters and forms are rich - such as: pump displacement, drive shaft form, oil port configuration, etc., so that users can choose according to installation needs;
Variety of mounting styles - a combination of 32 installations for dual pumps and up to 128 installations for triple pumps, which reduces costs and improves performance.
Wide applicability - Mounting in accordance with SAE J744a and ISO 3019-1 in the form of 2-hole flanges, with a variety of flat and spline drive shafts. For the vehicle type pump, it also has a T-type drive shaft (according to SAEJ718c) option, allowing direct assembly with the tractor (speed 540 ~ 1000 rpm);
Dual Shaft Seal Option - The automotive pump has a dual shaft seal version (T6*P type) with a drain connection for direct mounting to the gearbox.

PV29-1R1D-C02 PV29 2R1D C02

PV29-2R1D-C02-000 PV29-2R5D-C00

PV38-1L1D-C02-000 PV38-2R1D-C02-00

PV47-2R1D-C02-000