Hot Water Heat Pump
This Series of Eco-friendly Water Heater is desighed to make domestic sanitary hot water. As a lovely equipment, it can be put in storage/garage or near the kitchen or the washing room. A lot of attention has been put to its appearance design. To make the whole unit small, the structure inside is also very compact and organized well.
FEATURES
1) Coil set outside the tank bringing better corrosion protection
2) Compact design with 80L/200L/300Lavailable for option
3) Extremely compact structure, nice looking and good demountability
4) High efficiency compressor with R134a refrigerant
5) Galvanomagnetic four way valve or two way valve.
6) Intelligent controller and adjustment by quick-mind microprocessor
7) Air exchanger (fin-coil) with hydrophilic coating
8) Automatic defrosting function included
9) Electrical heating element inside as back up for emergent request
10) Thermostatic or electronic expansion valve
11) Air outlet and inlet designed with duct connections for different practical usages
12) General and operational test carried out for every unit before package in the factory
13) Ventilation installation can be adopted
Optional
Solar heating system control for option
Stainless steel spiral flexible coils for option
Wireless controller
CERTIFICATIONS
CE, CB, EC, ETL, CETL, C-TICK, WATER MARK, STANDARD MARK, UL, SABS, SANS, SAA, SASO, VDE, RoHS, REACH, EN16147, EN255-3, Recs, Water Mark, Standard Mark, EF, FHR, ISO9001, ISO14001, Six Sigma, Lean Production and Management
Eco-friendly Water Heater | |||||
Model | PASHW | 003-80LD | 008-200LD | 010-250LD | 015-300LD |
Heating Capacity | kW | 1.0 | 1.8 | 2.3 | 3.2 |
| BTU/h | 3400 | 6100 | 7800 | 10880 |
Power Supply | V/Ph/Hz | 230V~/50Hz | |||
COP | W/W | 3.7 | 3.9 | 3.6 | 3.6 |
Water Tank Volume | L | 80 | 200 | 250 | 300 |
Net Dimensions(D×H) | mm | Φmt Dimen | Φmt Dimen | Φm60×1956 | Φm60×1956 |
Shipping Dimensions(L/W/H) | mm | 710/640/1225 | 630/630/1740 | 630/630/2010 | 720/720/2020 |
Heating: Ambient temp.:15/13°C, Water temp from 15°C to 45°C; Energy efficiency test is based on Standard DINEN255-3-1997. The above data is for reference only; specific data is subject to the product nameplate. | |||||
All PHNIX heat pumps are processed with strict management system to ensure the quality and consistency. All the products like swimming pool heat pumps, heat pump water heaters, sell well in the global market.
There are processing documents for each operating post in detail and all the daily manufacture dates will be analysed through the manufacture data base system and shown on the white board set in the workshops to improve the operation skills of our workers.
As the development of company, more and more advanced production modes were adopted in PHNIX, such as 7S and lean manufacturing, which made the production more exact and efficient.
The leading manufacturing methods from Europe and North America are applied to our production line and we always focus on the detailed processing steps such as welding, cutting and insulation to ensure superior quality of our products.
In order to ensure the company's quality management system operated effectively, and continuously improve our product quality and services.
Formulated the following quality policy and quality objectives, is now officially promulgated, all staff have to study and understand clearly, and effectively implement
The company's quality policy is: scientific management and ensure quality; to be the best and make customer satisfied.
The company's quality objectives are: to ensure that the finished product qualification rate reached 100%; strive to major quality accidents to zero.