hydraulic double head ready made garment heat embossing pressing machine

1.stroke adjust between heating plates.

2.silicone and catalyst mixing,mixing as the ratio,for fix mold on heating plate and fabric prining

2.filling silicone on molds.Set the position for molds you will stick to the heating platen,male mold on the top, female mold on the bottom.Start machine hot pressing,time: 90s

(tips: avoid fabric sticking on mold,apply some detergent on mold
fabric embossing time: 8s-12s)

3.printing tools: Screen Printing Scraper+printing frame

printing the silicone on back side of fabric(screen printing),Preheat the machine. Set the temperature between 170-220℃,and the time about 12sec.

4.Make the heating platen press down.After 12 sec. it will auto release.

5.Use the machine to do the embossing.

Features:
1. Heating plate heating up and down, adjustable temperature up to 400 °C.
2. The size of the heating plate is 300*400mm, and the size of the heating plate is customized.
3. Built-in counting function, automatic counting of the number of moldings during production.
4. Two working positions, which can be controlled independently or simultaneously.
5. Double oil circuit, single motor and single oil pump control, low energy consumption.
6. Hydraulic pressure, stable and safe performance, strong product adhesion.

Adjuster of distance: the distance of both plates is can be controlled according to material and the thickness of pattern.

 Our Factory

 Seaworthy wooden packaging