combo heat press machine 8in1 for DIY sublimation shop

  Random standard Mug press!!↓ ↓

This machine can be free to choose whether to match the mug press part !!↓ ↓ 

Specific Operating

Heat Press Machine

1.Connect the plug with 220v,open the power switch,then its indicator lights(Attention:the whole machine must have the protecting ground wire)

2.Adjust the needed tempreture(actually 180-200°) and time(actually 40-45s)

 Tempreture sets up:press the push botton of SET one time,it shows SP station,then press + or - to set the needed tempreture,finish the adjusting tempreture

 Time sets up:press the push botton of SET the second time,it shows the SF station, then press + or - to set the needed tempreture,finish the adjusting time,then press SET push botton return to the warming interface.

3.Put the clothes on the silicone pad,then put the picture on the clothes,with the handle forced under pressure until it is completely closed;(the press is no more than 30kg,otherwise the handle will be deform)

4.When the time is up,the warning buzzers,then  put the handle back into place;

5.If the transfer paper is the hot one,pls tear it up at once;

   If the transfer paper is the cold one,pls tear it up after 10-15seconds.

Attention:

Heat Press Machine

1.The whole machine must have the pretecting ground wire to keep safe;

2.The perfect transfer needs the right time,tempreture and press.Many factors will effect the transfer print,such as thickness of clothes,materials and the types of transfer paper.After transferring the trial,then can produce the large quatity.