APW41037Z-A15-2010BB
APW41037Z-A15-2010BB Product Description
APW41037Z-A15-2010BB includes 5 main parts:
1. 2000mm × 1000mm working area cutting table;
2. one set of 3-Axis cutting head;
3. 410Mpa intensifier pump;
4. CNC control System (Auto Saving);
5. a New Auto Abrasive Delivery System.
APW-2010BB Waterjet Cutting Table
Cantilever Style Cutting Machine is one of the two traditional styles. It has 3 sides open. As this mechanical structure, it is easy to load/unload material. Although, it doesn't like Bridge Style Cutting Machine have two support points on each side, Cantilever Style Cutting Machine still very stable. It is because it uses the ball screw unit and flexible coupling to reduce vibration influence, which ensures its accurate machiningthe even under the high-speed processing.
| APW2010BB Cutting Table Details | |
| X and Y axis Travel | 2000mm × 1000mm |
| Z-axis Travel | 150mm |
| Control Accuracy | +/- 0.01mm |
| Cutting Accuracy | +/- 0.1mm |
| Servo Motor Specification | 0.75KW 1.0KM 1.5KW |
| X-axis and Y-axis Max.moving speed | 6000mm/min |
| Z-axis Max.moving speed | 1000mm/min |
| Specification | |
| Cutting Head | 3-Axis |
| Way of Drive | AC Servo |
| Servo System | Yaskawa Servo Motor |
| Linear guide | SKF(America) |
| Ball Screw | TBI(Taiwan) |
| Nozzle and Orifice | America |
| Atmosphere Pressure | 86Kpa ~ 106Kpa |
| Dust Concentration | Not More than 10mg/m3 |
| X, Y-Axis Structure | Aluminium Structure |
| Water Tank | Stainless Steel |
410Mpa Intensifier Pump
Intensifier is the heart of waterjet. It gives waterjet metal cutting machine life. APW A15 41Mpa intensifier pump is a miracle and it realizes the dream of every waterjet users whoever used, maintained or researched waterjet metal cutting machine. APW waterjet integrated SIEMENS motor, imports REXROTH hydraulic Pump and hydraulic valves assembly, American A&V Intensifier, American high pressure tube and stainless steel water tank.
| APW41037Z-A15 Intensifier Pump | |
| Max discharge of oil pump | 90L/min |
| Max water discharge | 3.7L/min |
| Max available orifice diameter | 0.3mm |
| Max pressure | 410Mpa |
| Continuous working pressure | 340 ~ 360Mpa |
| Main motor power | 37KW(50HP) |
| Power supply | 380V/50HZ/3PH |
| Max.oil pressure | 20Mpa |
| Length/width/height | 1745/1045/1350 |
| Weight | 1200kg |
| Specification | |||
| Intensifier | A&V(USA) | Main Motor | Siemens |
| Hydraulic pump | Jinda Hydraulic | PLC | Omron |
| Heat Exchanger | Water/Oil panel cooler | Control System | LP/HP auto control |
| Temperature Display | Digital Temperature Display | Shock Absorber | Four corners of the motor |
| Directional Valve | Taiwan YUKEN | Accumulator Volume | 1L |
| Oil level and oil temperature sensor | Standard Components | High Pressure Outlet Connections | M16 × 1.5 |
| Cooling Water Inlet Pressure | 0.3Mpa | Cutting Water Inlet Pressure | 0.3Mpa |
| Low Pressure Filter | 10um | ||
CNC Auto Saving Controller Software
Our company's waterjet using our own waterjet software to control 3-axis, 4-axis, 5-axis waterjet metal cutting machine.
PC requirement:
Support Windows 2000, Windows XP, Win 7;
CPU: above 1.5GHz;
Memory capacity: above 256M;
Hard disk: above 80G;
| Main Characteristics of CNC System |
| 15 Inch LCD Monitor |
| Support DXF and NC code file |
| Forward and backward processing function |
| Even pace control function |
| Partial and smooth processing modes |
| Small arcs speed auto processing function |
| Circle processing function |
| Coordinate memory retention function |
| Double increase & decrease speed data function |
| Muliti-language operating interface |
New Auto Abrasive Delivery System
With the new design, the new auto abrasive delivery system allows operator to add abrasive even during the machine working. It avoids to stop working for adding abrasive, which largely increases the working efficiency and reduces the energy consumption during operation.
| New Auto Abrasive Delivery System | |
| Max.Inlet Air Pressure | 0.6Mpa |
| Min.Inlet Air Pressure | 0.2Mpa |
| Abrasive Capacity | 250Kg |
| Min.Inlet Air Flow | 0.028 m3/min |
| Operating Air Flow | 0.005 m3/min |
| Self-feeding Control | |
| Air Valve to prevent jams and breakages | |
| Self sealing | |
| No need to stop the machine during abrasive filling | |
Certifications
Customize & Service
APW leading waterjet cutting machine manufacturer of waterjet cutting machine owns an important and the largest manufacturing base of ultra-high pressure waterjet industry in China. We provide high quality products and service. Custom waterjet metal cutting machine service at APW will help you rather than let you fit them.
High-Tech Options
| AC 5-Axis | |
| A axis Max.Cutting Angle | +/-45° |
| C axis Max.Cutting Angle | Auto 360° |
| Control Software | Lantek 3D Software as post processor |
| Cutting Accuracy | +/-0.1mm ~ +/-0.2mm |
A/C 5-axis 3D cutting head: X, Y, Z, A, C. A-axis is the tilting axis; C-axis is the rotation axis.A/C 5-axis 3D cutting head is designed for 3-D cutting application. The cutting head is able to cut 3-D drawings with max. cutting angle upto ±45 degrees.The machine integreted Lantek 3-D software as post processor.
Packing & Delivery
Waterjet metal cutting machine will be packed by Soft package in container by FCL.
Packaging Details: waterjet is soft packing;
Delivery Detail: time of delivery is 20 working days after receipt of deposit.
Related Products