Manual Control Horizontal Glass Drilling Hole Machine
Brief Introduction
It is specially used for the drilling and trepanning of glass. Good rigidity, wide range of hole diameter, large machine base space, process all size of glass; low working table, easy operation; the speed adjustment of lower bore bit adopts gas-liquid, stable speed improves process performance; high efficiency, can be used in mass production and flow process.
Picture of Drilling Machine
Main Technical Parameters
Name | Specification |
voltage/frequency | As request |
Glass thickness | 3-20mm |
Max. size of glass | 2600*1800mm |
Diameter of drilling machine | 4~220mm |
Distance between axis center and stand column | 1257mm |
Bore-hole and screw hole of connecting end of axis and bore bit | taper angle=60º diameter of screw hole=G1/2” |
Total installed power | 2.45KW |
Overall dimension of host machine | 750x2100x1700 mm |
Total weight | 1000KG |
Picture of Processing and Picture
1)Installation and Training: Technicians are available to serve overseas for installing and training.
2)Warranty: 12 month quality guarantee except for the man-made damage and force majeure circumstances.
3)Cost: Above mentioned travel expense is on the buyer, including the round ticket, accommodation cost and the daily wage.