Detailed Product Description
Flat and bent glass tempering
For normal, low-e glass, coated glass
Glass size:2000 x2500mm
Lengthway bent
Glass machine
Advantage:
- High product quality
Opposite roll pressing, mechanical position location and accurate forming smooth without press mark.
- Easy operation
Glass curve is automatically controlled by computer without any mould.
- Low Energy consumption
The energy consumption of this machine is very low with good thermal insulation and reasonable energy saving.
Application:
The glass bending tempering machine can process flat and bent tempering glass on the same machine. With human friend interface Beckhoff controller, all processing data can be input and set on computer which greatly facilitate production. We have many types of glass bending/tempering machine for different size of glass and output.
Machine specification
Machine dimension: Length: 15m Width: 2.4 m Air collection room: 40m2
Glass size:
l Max. glass size: 2000 x 2500mm (Bent) (Lengthways bending)
l Max.glass size: 2000x3600mm (Flat)
l Minimum size of the glass: 450 × 600 mm
l Glass thickness range: 5 to 19 mm (Flat)
l Glass thickness range: 8 to 12 mm (Bent)
Quality standard:GB9963
Finished parts qualification rate: ≥96%
Output: 15 lots per hour, assuming 5mm glass
Total power: 680KW,
Power Consumption: ≤6 degrees (use10mm glass calculate)
Machine main components:
The tempering furnace is consisted by loading table, heating furnace, tempering cooling device ,unloading table, wind motor, wind blowing system ,electric control cabinet and computer control terminals. For bending and tempering furnace, an additional bending and cooling cabinet is assembled for glass bending.
