Specifications
150g geotextile supplierMaterial:PP / PET recycled or virgin
Width:1-6m
Weight:100-1200gsm
White/black
150g geotextile supplier
150g geotextile supplier Introduction:
With inter-fiber space, 150g geotextile supplier has very good adhesive power. The soft surface gives it high tearing strength, deformability as well as flat drainage ability. The soft and interspaced surface guarantees good friction coefficient, which enables it to absorb small soil grains. 150g geotextile supplier can prevent the soil from being washed away, meanwhile it realizes water discharging. Moreover, the soft surface gives protection to the facilities below.
150g geotextile supplier Feature:
1. High intensity, strong penetration resistance;
2. Resistant to acid and alkaline, corrosion and aging;
3. Excellent permeability and filterability;
4. Low cost, favorable price and convinent construction
150g geotextile supplier Application:
1.Filtration :
It can be the filtration layer of the dykes, river canal, seacoast, concrete slope, retaining walls. At the same time of preventing the clay granule from passing, it allows the water and the gas pass through freely.
2.Separation :
The isolation of the railway dregs and the roadbed, roadbed and the soft base, surface of the airdrome and parking lot and the groundsill, different dam materials. It isolates the soil and the gravel of two kinds different granule pathway from the groundsill or other buildings.
3.Reinforcement/Roofing :
The highway, railway, soil-stone dam, breakwater, airport and backfill soil of retaining wall, slope protection, etc in which distributes the earth stress, prevents the side-displacement of the earth body and improves the earth-body stability. Also, used as a waterproofing substrate for roofing industries
4.Protection :
It prevents the bank from being washed out, protects the bank and the bottom, prevents the water and soil from being washed away
150g geotextile supplier Index:
Item | Specification | ||||||||
100 | 150 | 200 | 300 | 400 | 500 | 600 | 800 | 1000 | |
Nominal Breaking strength,KN/M
| 4.5 | 7.5 | 10 | 15 | 20 | 25 | 30 | 40 | 50 |
Breaking strength,MD/CD,KN/M≥
| 4.5 | 7.5 | 10 | 15 | 20 | 25 | 30 | 40 | 50 |
Elongation at break,%
| 40-80 | ||||||||
CBR Mullen Burst Strength,KN≥
| 0.8 | 1.6 | 1.9 | 2.9 | 3.9 | 5.3 | 6.4 | 7.9 | 8.5 |
Tear strength,KN≥
| 0.14 | 0.21 | 0.28 | 0.42 | 0.56 | 0.70 | 0.82 | 1.10 | 1.25 |
Sieve size O90(O95),mm
| 0.05-0.20 | ||||||||
Vertical Permeability Coefficient, cm/s | K×(10-1-10-3), K=1.0-9.9 | ||||||||
Thickness,mm≥ | 0.8 | 1.2 | 1.6 | 2.2 | 2.8 | 3.4 | 4.2 | 5.5 | 6.8 |
Width Variation,% |
-0.5 | ||||||||
Weight Variation,% | -5 | ||||||||
Remarks | We also can produce almost double Strength higher than the chart show | ||||||||
