Deep Sea Battery Charger DSE5100D 24V 5A 24V 10A
Specification:
MODEL | GF240-1B-AM | |
OUTPUT | DC VOLTAGE | 24V |
OUTPUT POWER | 240W | |
CURRENT RANGE | 0-10A | |
RIPPLE & NOISE(max.) | 240mVp-p | |
VOLTAGE ADJ. RANGE | ±10% | |
LINE REGULATION | ±1.0% | |
LOAD REGULATION | ±2.0% | |
VOLTAGE TOLERANCE | ±2.0% | |
SETUP,RISE TIME | 800ms, 50ms at full load | |
HOLD UP TIME | 60ms | |
INPUT | VOLTAGE RANGE | 90-264VAC 110-260VAC |
AC CURRENT(Typ.) | 0.35A/ 226VAC 0.18A/ 240VAC | |
FREQUENCY RANGE | 47-63Hz | |
EFFICIENCY(Typ.) | 82% | |
INRUSH CURRENT(Typ.) | COLD START 15A/115VAC 30A/230VAC | |
LEAKAGE CURRENT | <0.75mA/240VAC | |
PROTECTION | OVER LOAD | 115%~135% of rated power; Pulsing hicuup shut down,auto recovery |
OVER VOLTAGE | Rated output voltage of 105%~150% start overvoltage protecion | |
Protection: burst mode,load of abnormal conditions removed the automatic recovery | ||
SHORT CIRCUIT | voltage off and reset input for recovers | |
ENVIRONMENT | WORKING TEMP. | -0°C ~ +45°C (Refer to output load derating curve) |
WORKING HUMIDITY | 20 ~ 90% RH non-condensing | |
STORAGE TEMP.,HUMIDITY | -20°C ~ +85°C 10~95% RH | |
TEMP. COEFFICIENT | ±0.05%/°C | |
COOLING METHOD | BY FREE AIR CONVECTION | |
SAFTY & EMC | SAFTY STANDARDS | CE EN60950-1 Approved |
WITHSTAND VOLTAGE | I/P-O/P:1.5KVAC, I/P-FG:1.5KVAC, O/P-FG:0.5KVAC | |
ISOLATION RESISTANCE | I/P-O/P, I/P-FG,O/P-FG: 100M Ohms/ 500VDC | |
EMI CONDUCTION | Compliance to EN55022 | |
HARMONIC CURRENT | Compliance to EN61000-3-2,-3 | |
EMS IMMUNITY | Compliance to EN55024 | |
OTHERS | CONNECTION TERMINAL | MARK: AC-L, AC-N, FG, GND, GND, DC+, DC- |
DIMENSION | L200*W111*H49.5MM | |
WEIGHT | 1.0Kg,20PCS/Carton | |
SHELL MATERIAL | Chassis:2.0mm thickness aluminium;Cover:0.7mm thickness iron(silver plating) |
1. Inquiry answered within 24 hours
Don't hesitate to send inquiry to us if you want our products.
We will do our best to reply as soon as possible and help you get more profit here.
2. Fast Delivery
Goods will be sent out in 2-3 working days after receiving your payment.
3. Total Customer Satisfaction
The staff of Holdwell is honest, responsible and considerate.
Our spirit is "Total Customer Satisfaction".
1. Q: What is the relationship between Holdwell and Jeenda?
A: They are sister companies.
2. Q: Where is your company located? How can I visit there?
A: Our office is located in Hangzhou, Zhejiang, China, near Shanghai.
You are warmly welcomed to visit us!
3. Q: What is the warranty of your products?
A: The warranty of our products is 12 months.
4. Q: Can the price be cheaper?
A: Of course, you will be offered a good discount for big amount.
You May Like
- Deep Sea Battery Charger DSE9260 10 Amp 24V
- Deep Sea Battery Charger DSE9140 10A 12V
- Smartgen Genset Battery Charger BAC08
- Generator AVR Automatic Voltage Regulator AVR AS440
- Deep Sea Battery Charger DSE9130 12V 5A
- Deep Sea Battery Charger DSE9150 3 Amp 12 Volt
- Deep Sea Electronics Genset Control Panel DSE8810
- Monicon ATS-100 Auto Transfer Switch
- Leroy Somer Bridge Rectifier Diode For Generator SSAYEC432
- Automatic Voltage Regulator Compatible With Basler VR63-4 & VR63-4A
Find Similar Products By Category
You May Like
- Varistor C for Stamford Generator
- Onan Engine Control Board 300-2812
- High Quality Generator AVR MX341 with Competetive Price
- Holdwell high quality Idler Micro 6689611 for Bobcat Skid Steers S100 T110 S450 S130 S150
- Holdwell high quality wheel nut 6564669 for bobcat Skid Steer Loader 653 700 720 730 731 732 741
- Holdwell high quality wheel Bolt 6709170 for Skid Steer Loader 444M 500 530
- Holdwell high quality drive belt 6660994 For Bobcat Loader 753 763 773 7753
- Holdwell high quality drive belt 6667322 For Skid Steer Loader S130 S150 S160 S175 S185 T180 T190
- Holdwell high quality drive belt 7146391 for Bobcat Skid Steer S510 S530 S550 S570 S590
- Holdwell high quality aftermarket Muffler 7100840 for skid steer loader 751 753 S130 S150
- Holdwell high quality Hydraulic oil breather cap 6727475 for Bobcat Excavator Loaders
- Holdwell high quality starter motor 6630182 for 643 743 825 1600
- Holdwell high quality starter motor 6667587 228000-5810 for S300 T190 643 645
- New 2612207 Control Gp Transmission 261-2207 261-2208 for Backhoe Loaders 414E,416D,416E,420D
- Holdwell Alternator belt 7100104 for 560 753 S130 S150 S205 S510 S530 S570 S590 T140 T180 T190 T550