hydraulic pump tester
Portalbe and digital hydraulic pump tester for hydraulic repair factory
MYHT portable hydraulic testing gauge,which is used for checking and surveying hydraulic system's ure and
temperature,is the initiation in china,and has gotten the country patent.
Portable hydraulic tester, hydraulic system that is able to reflect the performance of the main parameters (pressure, flow,
leakage, temperature and speed, etc.) for field testing without removal system piping instrumentation. Which is characterized by
rapid measurement of system pressure, flow, power and other key parameters, and thus can determine exactly which a
hydraulic component is faulty. Detection saves maintenance time and increases productivity.
The MYHT digital potable hydraulic tester is an all-in-one unit designed to test the performance of hydraulic
pumps,motors,cylinder,valves and hydrostatic transmissions.
Digital Display Portable Hydraulic Tester | ||||||
Item No. | Max.Flow(L/MIN) | Precision | Max.Pressure(BAR) | Temperature(℃) | N.W.(KG) | Dimension(MM) |
MYHT-1-2 | 200L/MIN | ±1% | 420 BAR | 150℃ | 6.1 | 530*320*260 |
MYHT-1-4 | 400L/MIN | ±1% | 420 BAR | 150℃ | 8.8 | 530*320*260 |
MYHT-1-5 | 500L/MIN | ±1% | 420 BAR | 150℃ | 10.2 | 530*320*260 |
MYHT-1-7 | 700L/MIN | ±1% | 420 BAR | 150℃ | 15 | 580*440*500 |
Features:
The easy-to-use design allows the operator to just switch on and test,without complex setup or special training.The MYHT is the
ideal tool for pinpointing hydraulic system faults,reducing downtime and helping in preventative maintenance.Simple operation
includes a toggle switch to display either flow or temperature readings and a bulit-in loading valve is specifically designed to
enable the operator to simulate the maximum working pressure safely during normal machine operation.
1.ACCURATE measurement of flow,pressure,peak pressure and temperature.
2.SAFE to use in both directions of flow.Internal oil by-pass protects multimeter and operato against overpressure.
3.Bi-DIRECTIONAL for unrestricted connection and simplified testing.
4.FAST checks on pumps,motors,valves,cylinders,hydrostatic transmissions.
5.EASY to operate controls.Connect Into the hydraulic system and simply“Switch on”.
6.PORTABLE AND LIGHTWEIGHT with the case for easier viewing and cleaning.
7.RECHARGEABLE POWER:lithium battedes 12v.
Accessory:
- 1.5m rubber hose:2 pieces
- 1.5m testing pressure line:1 piece
- Tie-in:2 pieces
- Multipurpose flange:4 pieces
- Charger:1 piece
Warning:
The loading valve should be at turn-on position. Otherwise, danger will arise.
Only the test result is precise with oil temperature kept at 30°Cor above
Open loading valve before test
Cut off power after completion of test
Maintenance:
Load valve: In correct connection of power, if the load valve could not work, check if there is any jam inside it.
Battery: The battery is able to continuously work over 30 hours and should be charged 4—8 hours for one time.
Flow Meter: It might because of pollutant if the flow meter is not able to show data normally. In this case, contact the
manufacturer to solve this problem.
High Land owns strong ability of R & D, first-class scientific management elites and advanced equipment for manufacturing
and testing.
Our main products are:
Hydraulic Pump
Hydraulic Comprehensive Test Bench
MYHT Portable Hydraulic Tester
Hydraulic Pump Parts
Hydrualic motor
If you have any requirement please do not hesitate to contact with me.