CRIS-1 low pressure mist diesel injector nozzle tester
CRIS-1 high pressure common rail injector test bench is based on the diesel engine ECU, also provides control signal of common rail system of Bosch, Denso, Delphi and Siemens etc. (the CP1 /CP2 /CP3/ HP3 /HP4 / DELPHI), drive the high pressure common rail injector to work. The user can set parameters according to their actual situation, and save the data according to the different group, so that the servicemen do the correct judgment and maintain of the working of common rail system.
Products features
1. Support high-speed solenoid valve type common rail injector, and support the third generation of high pressure common rail piezoelectric crystal common rail injector
2. Support various rail pressure sensor
3. Hardware and software both the short circuit protection, machine more reliable configuration
4. Motor soft start, stepless speed regulation
5. rovide special fixture of testing injector
6. Set the injector drive letter pulse width and frequency
7. Set scale valve driving signal dutyfactor setting
8. Setting rail pressure and open/closed-loop control
9. Measurement of the fuel delivery of common-rail injector
10. Measurement of the reflux delivery of common-rail fuel injector
11. Testing the opening pressure and the degree of atomization of common-rail injector
12. Test the cranking oil quantity of common rail injector
13. Test the sealing of injector
14. Ultrasonic cleaning of the common rail injector
15. Various linguistic choice, Chinese/English/Russian
16. Safety design, prevent operators, use more safety
Model | CRIS-1 |
Rotating speed range of main shaft (rpm) | 0~3000 |
Rotation direction of main shaft | Positive, negative |
Testable cylinders of injection pump | 1 |
Maximum output power (kw) | 5.5 |
Fuel supply pressure of common rail (Mpa) | 0~160 |
Oil measuring frequency | 0~1000 |
Capacity of fuel tank (L) | 20 |
Pulse Width set: (MS) | 0~-3000 |
Pressure control (PID) | Open loop /close loop |
Power of inverter (kw) | 7.5 |
Controlling temperature of fuel (°C) | 40±2 |
Power of main motor (kw) | 5.5 |
Weight (kg) | 300 |
CRIS-1 low pressure mist diesel injector nozzle tester
Your Best Choice !!
Top Manufacturer With 50Years Experience in China
1 9 6 6 . 8
"Taian Experimental Equipment Factory" founded
1 9 7 7 . 9
12PSY series diesel fuel injection pump test bench national identification stereotypes
1 9 8 5 . 1 0
Diesel fuel injection pump test bench adopt international standard acceptance
1 9 9 4 . 7
"Taian Experimental Equipment Factory" change system as "Shandong Taishan Experimental Equipment Co.,Ltd"
1 9 9 9 . 9
"Shandong Taishan Experimental Equipment Co.,Ltd" restored as "Taian Experimental Equipment Factory"
1 9 9 9 . 1 2
Pass the ISO9001 Quality Management System Certification
2 0 0 0 . 10
Company acquire title of Shandong Province High-tech Manufacturer
2 0 0 3 . 1 1
"Taian Experimental Equipment Factory" completed change system
"Taian Taishan Jinshi Machine Co.,Ltd" founded
Taian Taishan Jinshi Machine Co.,Ltd(manufacturer)
Sales Manager - Frank Zhang
ADD: MIDDLE PART OF CHUANGYE ROAD,TAISHAN QINGCHUN CHUANGYE DEVELOPMENT ZONE,TAIAN CITY,SHANDONG,CHINA
TEL:+86-538-8560888
FAX:+86-538-8560888
Mobile No(Whatsapp):+86-13583895953
QQ:1610926861
Skype:weiwei57555
Website: www.ur-brand.net www.ur-brand.net www.ur-brand.netHttp://www.tsjsjx.com
Http://chinatestbench.en.china.cn