Eps Shape Moulding Machine with Vacuum
PSZ1750 Automatic Shape Molding Machine with Vacuum
Introduction:
1. The machine adopts PLC and touch screen and advanced molding technique. It can produce various shapes of EPS products
2. The machine adopts two ways of material feeding.
One is common feeding, the other is pressurized feeding which features high speed and full feeding.
3. The vacuum system can accelerate molding speed, reduce cooling time and decrease moisture content of the product.
So the products can be dried easily or even don’t need to dry at all.
4. Hydraulic system adopts differential fast device which can improve the speed of mould moving. It can save time and the moving is stable.
5. It adopts various ways of heating according to different shapes of products. So it can ensure the good quality of the products.
Specification
Block size | 5000x1200x1000mm |
Density range | 4.5-30kg/m3 |
Capacity | 10kg/m3: about 9 blocks/hour |
15kg/m3: about 7 blocks/hour | |
20kg/m3: about 5 blocks/hour | |
Steam pressure | 0.6-0.8mpa |
Steam consumption: | 10-15kg/m3 |
Steam inlet DN | 100mm |
Compressed air inlet DN | 40mm |
Compressed air consumption | 1.8-2.2m3/cycle |
Electricity | 380V |
Frenquency | 50HZ |
Power consumption | 25KW |
Overall weight | 12000KG |
Overall size | 66000mmx2150x2950mm |
1. with all accessories such as filling guns, ejectors and so on.
2. 1.5 minutes per cycle
3. Mould is coated with Teflon
Item | Unit | PSZ1750 |
Mould Size | mm | 1750×1450 |
Product Size | mm | 1550×1200×330 |
Mould Opening Distance | mm | 1620 |
Steam Consumption | kg/cycle | 10 |
Steam Pressure | map | 0.6-0.8 |
Cold Air Consumption | kg/cycle | 60-190 |
Compressed Air Consumption | m3/cycle | 2 |
Compressed Air Pressure | map | 0.6-0.8 |
Inspiratory Capacity for Vacuum Pump | m3/cycle | 280 |
Production Cycle | sec | 90 |
Installed Power | kw | 16.5 |
Overall Dimension | mm | 5000×2400×4000 |
Overall Weigh | kg | 5000 |
♦ We assign technicians for the installation of the machine.
♦ We prepare enough quick-wear spare parts for the customer.
♦We will help train technicians until the buyer can run the line by themselves.
♦We will also give our customers the best formulation to ensure make the best-quality panels at the lowest cost.
♦ If there is anything wrong with the machine because of the machine quality, our technician will go to repair it without any charge.