Specifications
EPE foaming stick plastic machineEnterprises passes the ISO9001:2000 quality system certification and CE certificate.
EPE foaming stick plastic machine
product introduction:
Foam Stick is a kind of new-type foam material and it is widely used in the jacket of air conditioner, pipeline heat insulation, toy guardrail and recreation places etc. due to its high foam ratio, good elasticity and heat preservation.
application:
Non cross-linked closed cell polyethylene foam tube for plumbing, heating, refrigeration and air conditioning insulation
General characteristics:
--flexible low weight material, easy to slip and install
--low thermal conductivity
--compatible with all sealing materials
--fine round closed-cell cellular structure assures: negligent absorption and water permeability
--excellent impact and compression resistance enven for low thickness
-- polyethylene based products-inert material, highly resistant to chemicals
--environmental friendly products
--100% recyclable
Main Technical parameters
Type | Unit | EPEG-70 | EPEG-75 | EPEG-90 | EPEG-105 | EPEG-120 |
L/D |
| 55:1 | 55:1 | 55:1 | 55:1 | 55:1 |
Screw speed | r/min | 5-60 | 5-60 | 5-60 | 5-60 | 5-60 |
Foaming rate |
| 20-40 | 20-40 | 20-40 | 20-40 | 20-40 |
Specification | mm | 20-40 | 20-50 | 30-80 | 40-100 | 50-120 |
Cooling method |
| Water cooling | ||||
Installed capacity | kw | 36 | 70 | 90 | 100 | 120 |
Dimension | m | 15×1.3×1.7 | 16×1.3×1.7 | 18×1.6×2 | 20×1.80×2 | 22×2×2 |
Total weight | t | 6 | 6.5 | 8 | 9 | 10 |
