UV Coating Oven

Specifications

UV Curing Oven Roller Coating Machine Roller Coating Equipment, High-quality UV putty filler machinery(JXFT I-1000) 600mm/1300mm Light Lacquer Equipment

Descriptions:

•Glass Roller Coating Machine This machine is suitable for all kinds of products with rough surface(but only for the products with a little rough surface).the steel wheel can fill paint to the sunken place and replace manual filling.it can be widely used in flat products like,floor,furniture,decorating board,calcium silicate board and so on.

•The filling amount can be adjusted by scraper and roller.

•It is suitable for paints like PU,UV,NC,PE and water-based paint,etc.it is also equipped with device to prevent lacquer paint spilling out.

•The conveying of the working pieces is controlled by conveyor belt which has automatic centering system.

•The changing system is quick and the roller can be disassembled conveniently.

•UV Curing Oven The thickness is controlled by shutoff with emergency stopping if the working pieces is thicker than the previous one.

High-quality UV putty filler machinery(UXFT I-1000)specifications:

•The effective working width is 1000mm,working thickness is 2-80mm,smallest working length is 300mm.

•The feeding speed is 5-20m²/min,conveyor power is 1.5kw.

•The rubber wheel size is 240*1450mm,rubber wheel power is 1.5kw,steel wheel size is 130*1450mm,steel wheel power is 0.75kw.

•Glass Roller Coating Machine The machine's size is 1600*1960*1580mm.

•UV Curing Oven The machine's weight is 1300Kg.

Delivery&Payment terms:

•FOB Shenzhen,30% deposit and clear the balance before the shipment.