Specifications
The jacket is woven by high strength Polyester yarn, both inside and outside lined with synthetic.outstanding performance
Taizhou City Longxi Hose Factory
Taizhou City Longxi Hose Factory is a specialized manufacturer of all kinds of fire hoses with well-equipment and strong technical force. With a wide range, reasonable prices and stylisth designs, our products are extensively used in firegighting, agriculture and other industries.
Durable fire hose is a 3-ply polyurethanes-covered fire hose with both the cover and liner extruded
independently and double vulcanized along with high tensile strength polyester reinforcement for
maximum durability and flexibility.The hose and its assemblies under this specifictions shall be constructed with superior quality materials.
Feature:
Outstanding performance, high pressure resistance, excellent corrosion resistance, ozone and ultraviolet radiation resistance, good anti-aging, abrasion proof and long using & storage life.
Normally it can be used under -30 to 60 degree Celsius.
(1) should avoid sudden twists and turns, in order to prevent the lower water pressure resistance ability;Should also avoid reverse, in order to prevent the water filling hose after the rotation and make the button inside the hose coupling release.
(2) after filling water should avoid forcibly dragged on the ground, try to lift the mobile need to change the position and to reduce the water and the surface wear.
(3) should be avoided with oil, acid, alkali and other corrosive chemicals.
(4) in May a flame or strong radiation area, cotton or hemp qualitative hose should be adopted.
(5) should be cleaned after finished with, without lining hose to hang dry, coil and then keep in a cool and dry place.
(6) holes found if there is any breakage in the course of using, application of hose bandage wrapped tight, later darning or fusible interlining as soon as possible;When a significant damage, shall be immediately out of combat readiness.
(7) vehicle to be laid in the hose, should put hose in through parts of the bridge.
(8) when laying for by rail, should from the track by below.
(9) cold area with inner lining should be used outside the building, so as to avoid hose freeze.