Delivery Time:45 Days
Certification:Qualified
Tracked Type Shot Blasting Machine for Mechanical Spring Surface Treatment
Tracked Type Shot Blasting Machine Description
Rubber tracked type shot blasting machine is a small shot blasting cleaning equipment, mainly by the room the shotblast cleaning, shot blasting machine assembly, hoisting machine, separator, shot blasting machine electrical system and other accessories.
It is suitable for small and medium sized castings, forgings, stampings, the gear, spring and other parts of deoxidization, rust removal, remove scale and surface strengthening, are especially suitable for the cleaning of parts and reinforcement.
Tracked Type Shot Blasting Machine
| Items | The main parts |
| Blasting Chamber | Chamber cover, liners, end plate, manual door, etc |
| Blasting Wheel | Blasting Wheel, Motor, Pulley, Triangle Belt, Base Plate, Etc |
| Elevator System | Cover, Elevator Belt Assembly, Pulley, Drive, Tight Device, Etc |
| Separator System | Separator, Shot Bucket, Etc |
| Screw conveyor | Screw shaft, blades, bearing base, etc |
| Tumbling System | Rubber belt, drive shaft and driven shaft, tight shaft, drive system, etc |
| Pneumatic System For Shot | Shot gate, cylinder, shot- slip pipe, air processor, etc |
| Electronic Control System | Control cabinet (conventional electronic control), the second line, etc |
| Dust Collector System |
Bag type dust collector , sedimentation tank, piping, blower, etc |
Tracked Type Shot Blasting Machine Advantage
1. Compact design, simple operating principle
2. Forced but gentle turning and tumbling of the parts for all-round shot impingement
3. Targeted high performance shot blasting for specific applications
4. Continuous and thorough shot removal
Tracked Type Shot Blasting Machine Operation
1. Add the shots and load in the workpieces, then close the door.
2. Start the fan of the dust collector.
3. Start elevator, blasting wheel and shot supply valve in turn.
4. After finishing cleaning process, stop shot supply valve, blasting wheel elevator and dust collector fan in turn.
5. After the machine stop completely, open the workpiece feeding door, unload the workpieces.
6. Emergency stop switch is for emergency situation. The whole machine will stop immediately after pressing the button.
7. Dust collector should be stop timely after finish all the duty.
Range of Application
1. Ferrous and non-ferrous castings
2. Heat treated forgings
3. Small Automotive parts
4. Die castings and much more
5. Lower value parts where part on part impingement is not an issue
6. When production requires dictate batch processing
7. Small to medium size castings, fabrications and heat-treated parts
8. Sand removal or part cleaning
Optimised shot blast effect
During shot blasting, the workpieces, regardless of size and shape, are evenly and continuously tumbled. This is necessary for the effective and uniform treatment of all surfaces.
During tumbling, the workpieces continually undergo shot removal, enabling workpiece interiors and cavities to be perfectly cleaned. For the complete removal of all shot, the final tumbling time that follows the shot blast sequence can be regulated to suit the type of workpieces being blast cleaned. The tightly sealed, leak-proof blast chamber minimises shot consumption.
Operation Attentions
1. All the machine operator must be to this specification and its principle of work performance and operation method, lubrication, etc have a comprehensive understanding, in order to operate;
2. Will the projectile (200 kg) in succession to join chamber body, and then into the workpiece, closed loading door, ready to drive;
3. Start the filter fan;
4. Start button: in order for pill gate hoist, shot blasting machine, and began to clean up. Cleaned up after the button closure in turn: used for pill gate, shot blasting machine, elevator, dust collector fan, restart vibrating motor ash removal, to a certain time after the shaking stopped;
5. After shot blasting machine stop completely, open the door of feeding, will the tooling and artifacts.
6. In case of an emergency, can according to the urgent stop button, the machine immediately stop all work;
7. All the work has been completed, should be timely close the filter;
8. Everyday after work, all the machine should be clean again;
9. Freq
