Specifications
PTFE membrane pleated filter cartridges1.High dirt holding capacity.
2.Advanced Korea technology
3.Extensive applicability.
Specifiaction
Material of Construction
A.Media: Media:Hydrophilic PTFE
B.Support layer:Polypropylene
C.Core/Cage/End adaptor:Polypropylene
D.Sealing method:Thermal bonding
Recommended Operating Conditions
A. Max.Differential pressure:
B. Forward-70psi (4.8bar) at 25°C
C. Forward-40psi (2.7bar) at 25°C
D. Filters change recommended at 1.5bar
E. Max.Operating temperature:95°C
Cartridge Dimensions
A. Filtration Area:0.75m2 each 10″length
B. Outer Diameter:69mm
C. Nominal Length:5″,10″,20″,30″,40″etc
D. Micron Rating:0.1,0.2,0.45µm
Application
A. Solvent filtration
B. Sterile vent filters for storage tanks
C. Coating-solvent in the electronic industry
D. Filtration of non-aqueous chemicals
E. Filtration of acid baths for the production of semiconductors
F. Compressed Gas
Features & Benefits
A. Hydrophilic PTFE membrane pleated cartridges with absolutely rated
B. Cartridges consist of a PTFE membrane with thermally bonded polypropylene components to
provide a very durable filter with only two materials of construction.
C. Superior flow rate and efficiency maximizing performance
D. Extensive applicability.
E. Extremely good chemical,high temperature-resistance
F. Good oxidation-resistance,high temperature-resistance
G. Remove particles and microorganisms greater than 0.2µm from gas and liquid
H. Cartridges 100% integrity tested by bubble point and diffusional flow to ensure consistent and reliable performance
I. Flushed with ultrapure water to remove any manufacturing debris
J. No adhesive,thermal bonded manufacturing without adhesives