Specifications
1.Pleated Air filter element2.Uniform pleat distribution
3.Large filter surface in a very small space
4.ISO Certification
Dust collector air filter cartridge
Dust cartridges are used to separate dust from gases. Dusty air or gas
is applied to the outside of the cartridges under pressure and the cleaned
airflow exits at the top.The retained dust can be cleaned off with a rotating
wing by means of a cleaning pulse or compressed air
Technical Data
Inner core: Galvanized steel (standard) or stainless steel V4A
End caps: Galvanized steel (standard) or stainless steel V4A
Seal: Soft material PUR
Filter media: Ti 07 - Electrically conductive polyester fleece with PTFE membrane
Length L[mm] : 600
Filter surface [m²] :7,5
max.volume flow[m³/h] : 750
max.operating temperature [°C] :80
3.Installation
The dust filter cartridges (diameter: 328 mm) are fastened to the filter
plate on the dirt side by means of a tie rod (tightening torque approx. 15 Nm).
A hole with a diameter of 214 mm must be drilled in the filter plate. Mounting
is facilitated by a centre ring
we have our own factory!
we have professional technial team!
we provide the best service to customer!
if you are interested in our product, please contact us!