Full automatic 1000l double layer extrusion blow molding machine /5 gallon pc bottle blow molding machine
Full automatic blow molding machine is suitable for producing PET/PE and PP plastic containers and bottles in all shapes. It is widely used to produce the carbonated bottle, mineral water bottle, pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc.
Reasonable design: full automatic control, save power and labor. Adopt high quality components.
Feeding system carries the performs by robot automatically.
Infrared oven heater adopts the quartz lamp to heat the PET tube.
Fully automatic process with low investment, high efficiency, quick and safe operation, easy for trouble-shooting, maintenance and other benefits.
Machine Features:
C.1. Stable performance with advanced PLC.
C.2. Conveying preforms automatically with conveyor.
C.3. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.
C.4. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.
C.5. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
C.6. No contamination and low noise with the air cylinder to drive the action instead of the oil pump.
C.7. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
C.8. Strong clamping force with high pressure and double crank links to lock the mold.
C.9. Two ways of operating: automatic and manual.
C.10. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.
C.11. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.
C.12. Contamination is avoided for the bottle body.
C.13. Ideal effect of the chilling with the chilling system.
C.14. Easy installation and starting
C.15. Low rejection rate: less than 0.2 percent.
Technical Parameter:
ITEM | DMK-L2 | DMK-L3 | DMK-L4 | DMK-L6 |
Theoretical output | 2000 | 3000 | 4000 | 6000 |
Max.container volume | 1.25L | 2L | 1.25L | 0.7L |
Max.neck diameter | 38MM | 38MM | 38MM | 38MM |
Max.container diameter | 80MM | 105MM | 80MM | 60MM |
Max.container height | 320MM | 335MM | 320MM | 265MM |
Number of cavity | 2 | 3 | 4 | 6 |
Number of lamp | 28 | 100 | 70 | 60 |
Max.heating power | 42KW | 100KW | 84KW | 90KW |
Installation power | 50KW | 110KW | 95KW | 100KW |
Actual power consumption | 35KW | 45KW | 40KW | 50KW |
Operatating low pressure | 0.7Mpa | 0.7Mpa | 0.7Mpa | 0.7Mpa |
Low pressure consuming | 1400L/min | 2000L/min | 2000L/min | 2000L/min |
Blowing pressure | 3.5Mpa | 3.5Mpa | 3.5Mpa | 3.5Mpa |
High pressure consuming | 3500L/min | 5500L/min | 5000L/min | 4500L/min |
Operating pressure | 0.3-0.5Mpa | 0.3-0.5Mpa | 0.3-0.5Mpa | 0.3-0.5Mpa |
Temperatuer | 10 | 10 | 10 | 10 |
Flow rater | 30 L/min | 40 L/min | 40 L/min | 50L/min |
Machine dimension | 2.7×1.8×2.2 | 3.5×2×2.2 | 4×2×2.2 | 4.9×2.15×2.2 |
Machine weight | 3500Kg | 4200Kg | 4800Kg | 5000Kg |
product show