Honey Tube Filling And Sealing Machine
1. Brief Introduction
HTGF-80 Tube Filling Sealing Machine is a kind of electromechanical equipment which can be applied to pack paste products like toothpaste, ketchup, paste food, cosmetics, hair-dyeing paste and the like. It can be used in plastic tube filling and sealing, also it can finish the date printing. The whole working process is fully automatic, which can really save you a lot of labor cost. Moreover, the operation is very easy, you only need one staff to operate the PLC touch screen.
2. Parameters of the Machine
| Product name | honey tube filling and sealing machine |
| Model | HTGF-80 honey tube filling and sealing machine |
| Air Pressure | 0.6Mpa |
| Productivity | 30-80pcs/min |
| Filling Accuracy | +-1% |
| hopper capacity | 50L(can be customized) |
| fulling volume | 5-15ml 15-150 30-200ml(can be customized) |
| tube diameter | 10-50mm |
| tube length | 210mm(Max) |
| power | 2.0kw |
| voltage | 220v 380v(can be customized) |
| dimension | 1900*1100*1900mm |
| weight | 850kg |
1.Stainless steel volumetric dozing syringe and Teflon piston seals for accurate dosage.
2.Tube lifting at filling station – so that filling nozzle gets inserted inside tube during filling.
3.Tail cutting by 'suck back' method to prevent dripping of product after filling.
4. Hot air tool for plastic / laminated tubes (Leister make heater).
5.PID temperature controller for accurate control of hot air temperature.
6.Air supply to air heater through independent blower.
7.Batch code embossing facility within sealing jaws (by using negatively etched character type
fount).
8. Trimming of plastic / lami tubes at the top end.
9. Preset counter.
10.No−Tube−No−Fill system.
11Control sensor for non ejected tubes.
12.Low air pressure switch.
13.Emergency stop.
14.Fixed position machine stop.
15.Plastic tube and aluminum tube can be do at one machine.
5. Samples
1.Packing Material: Standard Export Wooden Case.
2.Shipping Time: Within 30 days after deposit was paid.
| 1. How About the Installation & Adjustment? |
| After the equipment arrived at the customer’s site, customers are responsible for unpacking and arranging the equipment in reference to the placement drawing or under our install-adjust technicians’ guidance. Costs of our staffs are decided at last. |
| 2. Are There Training for Customers? |
| We are responsible for offering the technical training to user. The training content includes the structure and maintenance of the equipment, control and operation of the equipment. Through training, users' technical staff can grasp and the skill of operation and maintenance proficiently, and deal with the general troubles in time. We will appoint qualified technical staff for the guidance. |
| 3. How about the "Quality Assurance" |
We are responsible for the faults and damages of the production line caused by our design, technology, manufacture, installation, adjustment and material defect etc.The warranty period is 12 months after acceptance check of the production line. If there is any different between the furnished equipment in the customer’s factory and the equipment concerned in the contract, the users have the right to pass the inspection book to the legal department to claim for compensation to our company within goods warranty period. |
| 4.How about the Warranty? |
| We offer 12 months maintenance period to the problems that caused by our design, manufacture, and material quality, and offer the relevant parts and effective services for free if the problems was caused by above reasons. We will offer a life-long technical support, after service for customers. |
| 5. How to Contact Us? |