Our customer
Specifications
10/100M Fast Ethernet Fiber Media Converter
1 RJ45 +1 Optical Interface
SC/ST Connector
10/100M
Single Mode or Multi Mode
Fast Ethernet Media Converter, 10/100M Fiber Converter
MC13101203A
Product Introduction
10/100M Fast Ethernet Fiber Media Converter, relies on its unique function ofoptical-electricity LFA (Link Failure Alert) to realize the extension of LANEthernet.
Ethernet Fiber Media Converter achieves the interconversionof 10/100Base-TX UTP Cable electrical signal with 100Base-FX optic cable. Itextends the network transmission range from 100m, the limit of copper Cable, to120Km on fiber. It adopts Store and Forward mode or Cut-Through mode to realizethe data transmission between network connection media of optical fiber andelectricity. It supports optical transmission under dual-fiber multi-mode,dual-fiber single mode and single fiber single mode.
MainFeatures:
- Auto-Negotiation (802.3u) for10/100Base-TX for network upgrade.
- Built in effective switching corefor flow control, reduce broadcast packet
- Support Full/half duplexself-adaptive transmission mode and auto-negotiations
- Support Automatically detecting andconfiguring the twisted pair port on the converter to the correct MDI or MDI-XConfiguration, convenient for system debug and installation
- Support Link Failure Alert (LFA) ,Allows for quick diagnosis and resolution of network problems
- Support full/half duplex operationfor each TP switched port
- Support 10/100Mbps Store andForward mode or Cut-Through mode operation
- Optical interface supports100Base-FX, and fixed 100Mbps full duplex operation
- Support low delay transmission
- Support 1600 bytes for Cut-Throughmode
- Support 802.1Q VLAN tagged packetstransmission
- Support QoS, ensure VOIP datapackage transmission
- Ultra low power dissipation(<2W), low heat generation , enabledsteady operation over a long time
- Support the port choice ofdual-fiber multi-mode, dual-fiber singlemode and single fiber single mode, which expands the customers requirements
Technical indicators:
Parameters | Specification |
Access mode | 10/100Mbps |
Standard | IEEE802.3 10Base-TEthernet,IEEE802.3u,100Base-TX/FX Fast Ethernet, IEEE802.3x Flow control |
Wavelength | 850nm/1310nm/1550nm |
Transmission range | Dual-fiber multi-mode :2Km, Dual-fibersingle mode :20/40/60/80/100/120Km, Singlefiber single mode :20/40/60/80/100Km CAT 5 UTPcable:100m |
FX and TX Ports | 1 RJ45 connector: connect STP/UTPCAT 5 twisted pair 1 optical interface: multi-mode SC or ST optical interface (fiber size 50,62.5/125μm) Single mode SC/FC optical interface (fiber size 9/125μm) Single fiber single mode SC/FC optical interface (fiber size 9/125μm) |
Conversionmode | Store and Forward mode or Cut-Through mode |
Buffer size | Built in 128Kb RAM for data buffer |
Flowcontrol | Full duplex: flow control,half-duplex |
Bit errorrate | <10-9 |
MTBF | 100 thousand hours |
LEDindicator lamp | POWER(power supply),FX LINK/ACT(optical fiber connected/action) FDX(FX fullduplex ), TX LINK/ACT(twisted pair connected/action) TX 100(twisted pair 100M transmission rate), FX 100(optical fiber 100M transmissionrate) |
POWER Power adapter | input: AC 90~264V /DC100~380V output:DC5V 1A |
Power consumption | <2W |
Operating temperature | -10~55 |
Working humidity | 5%~90% |
Storage temperature | -40~70, 5%~90% no condensation |
Dimensions | Outside power supply:94mmX71mmX26mm |
BACK TO HOME PAGE!