Fujikura 80S Fiber Optic Fusion Splicer SM MM DSF NZDSF Fibers
Fujikura 80S Fusion Splicer is core-to-core alignment single fiber splicer, which is designed for splicing single-count optical fibers: SM (G.652/657), MM (G.651), DSF (G.653), NZDSF (G.655) for telecommunication use, PON/FTTx networks, etc.
Fujikura 80S model is successor of the famous series of splicers: Fujikura FSM-60S and FSM-50S. The new design streamlines the steps required to complete splices, resulting in greater productivity. "Configurable automation" features allow you to customize the operation of the machine to best suit your particular splicing technique and process. Splicing takes only 7 seconds, and heating takes only 14 seconds.
The device is optimized for splicing under severe weather conditions, it is protected from stress and shock. It may be powered from 200 V AC, or using a battery (included). For user comfort the package contains a convenient working table, where you may place the needed tools: a cleaver, a stripper, sleeves, etc.
Features
- Splices all known types of fibers.
- Fiber core alignment.
- Typical average splice loss for single mode cable with G.652D fiber is only 0.02 dB.
- Reduced splicing time – 7 seconds only.
- Heating time – 14 seconds only.
- Increased electrode lifetime – up to 3000 splicing cucles with one set, without splicing quality loss.
- Battery life increased up to 200 full splicing/heating cycles.
- Rotary color anti-glare LCD 4.73", high contrast and vividness.
- Simultaneous display of X and Y axes.
- May splice SC, LC, MPO connectors.
- Automatic: wind-protective lid, heater, fiber holders.
- Increased water, dust and shock resistance, may be used under severe environment conditions.
- Automatic arc calibration.
- Battery BTR-09 is included.
- New comfortable carrying case, optimized for quick operation start.
- The case may be used as a working table.
- Operation manual is installed into the splicer.
- Software update option.
- 2 years of full warranty with the device replacement.
Technical Specifications
| Splicing / Heating | |
|---|---|
| Typical Splicing Time | 7 sec (for SM) |
| Typical Heating Time | 14 sec (for 60 mm sleeves) |
| Applicable Fibers | SMF (ITU-T G.652) MMF (ITU-T G.651) DSF (ITU-T G.653) NZDSF (ITU-TG.655) CSF (ITU-T G.654) Fiber with low sensitivity to bends (ITU-T G.657) Erbium-doped fiber |
| Cladding Diameter | 80 μm – 150 μm |
| Coating Diameter | 100 μm – 1,000 μm |
| Fiber Cleave Length | 5 – 16 mm |
| Typical Average Splice Loss | 0,02 dB (SMF) 0,01 dB (mmF) 0,04 dB (DSF) 0,04 dB (NZDSF) |
| Splice Loss Estimate | core angular offset fiber deformation |
| Return Loss | ≤60 dB |
| Compatible Protection Sleeves | 60 mm 40 mm micro |
| Splicing Modes | 100 user programmable |
| Heating Modes | 30 (10 preset + 20 user programmable) |
| Internal Memory | up to 2000 splice results and parameters |
| Additional Options | |
| Mechanical Proof Test | stretching force 1.96 – 2.25 N |
| Electrodes lifetime | 3000 cycles |
| External Interfaces | USB 1.1, Mini-DIN |
| Data Display | |
| Screen type | rotary anti-glare LCD |
| Screen Size | 4.73" |
| Colour | Yes |
| Viewing | Yes (2 CMOS cameras) |
| Magnification | x200 |
| Power Supply | |
| Adapter ADC-19 | 220 V AC |
| Battery BTR-09 | 4000 mAh |
| Battery Cycles | up to 200 splicing/heating cycles |
| Operation Conditions | |
| Temperature | –10 ~ +50°C |
| Altitude above sea level | 0 ~ 5000 m |
| RH | 0 ~ 95% |
| Max. wind velocity | 34 mph / 15 m/s |
| Storage Conditions | |
| Temperature | –40 ~ +80 °C |
| RH | 0 ~ 95% |
| Protection | |
| Shock Resistance | height: 76 cm, any surface |
| Dust Resistance | dust particles from 0.1 to 500 μm |
| Rain Resistance | 10 mm/h for 10 min |
| Dimensions & Weight | |
| Width | 150 mm |
| Length | 159 mm |
| Height | 146 mm |
| Weight | 2,5 kg (with adapter ADC-18) 2,7 kg (with battery BTR-09) |
1. FUSION SPLICER: Comway C10; Sumitomo (T-81C); Fujikura (FSM-80S/70S/70R); Fitel S178A; INNO IFS 102.OTDR: EXFO (FTB-1/AXS-110/AXS-100/ FTB-200/FTB-500); JDSU (MTS-2000/4000/6000/8000); YOKOGAWA (AQ1200/AQ7275)
3. POWER METER (PPM-350C, FPM-300, HSV-300P); LIGHT SOURCE (FLS-300, HSV-300L); VFL (FLS-241, HSV-321); Multi Loss tester (FOT-930, FOT-302)
4. Anritsu site master S331D, S331L, S331E, S332E.
5. Fiber cleaver (CT-30A/CT-30/CT-05/FC-6S), adapter, battery, electrode, connector, fiber tool kits
6. Fiber cable, patch cord, adapter, closure, pigtail, optical switch, patch panel, etc..
7.Maintainance and repair, calibration service for the EXFO, JDSU, Sumitomo, Fujikura, Anritsu
After-sales Service(except consumables products):
> We guarantee all our electrical and mechanical parts for one year from the delivery date the machine running smooth in customer's place.
> We guarantee that each product is tested carefully and works very well before shipment. We strive for 100% customer satisfaction on every sale we complete.
> We are responsible for the whole lifespan of our products, and whenever you have questions during use, just call us, we are glad to offer technical support timely.
Life-long Maintenance Service:
> During the warranty period, we can repair or replace the defective parts for free.
> After the warranty time, we also repair the defective parts, but only charge part cost.
Shipping Damage Management:
> When you receive the package, please open and check it before signing, if it's damaged, ask a "Damage proof" from the delivery company.
Leo zhao
Skype:leozhao.hsv
WhatsApp:+8618320762262