PARAMETER | VALUE |
Applicable Fibers | Singlemode (G.652 & G.657), Multimode (G.651), DS (G.653), NZDS (G.655) |
Cladding Diameter | 80 μm to 150 μm |
Coating Diameter | 100 μm to 1,000 μm |
Fiber Cleave Length | 5 to 16 mm |
Typical Average Splice Loss | 0.02 dB with SM, 0.01 dB with MM, 0.04 dB with DS, 0.04 dB with NZDS, measured by cut-back method relevant to ITU-T and IEC standards |
Splicing Time | SM FAST mode — 7 seconds; SM AUTO mode — 12 seconds; AUTO mode — 15 seconds |
Arc Calibration Method | Automatic, real-time and by using results of previous splice when in AUTO mode, manual arc calibration function available |
Splicing Modes | 100 preset and user programmable modes |
Splice Loss Estimate | Based upon dual camera core alignment data |
Storage of Splice Result | Last 2,000 results to be stored in the internal memory |
Fiber Display | X or Y, or both X and Y simultaneously. Front or rear monitor display options with automated image orientation |
Magnification | 300X for single X or Y view, or 160X for X and Y view |
Viewing Method | Dual cameras with 4.73 inch TFT color LCD monitor |
Operating Condition | 0 to 5,000 m above sea level, 0 to 95%RH and -10 to 50°C respe |