easy use and stable fiber optic Central pressural polishing machine
1. Can process each kind of standard fiber optic connectors , such as FC/UPC,SC/UPC,ST/UPC,LC/UPC,MU/UPC,FC/APC,SC/APC,MT-RJ,E2000 etc
2. Convenience for adjusting pressure, unloading and replacing jigs
3. belt transmission
4. Excellent connector end face polishing quality, the percentage of products sent back for repair is very low
5. Save material and low cost for grinding
6. Easy to use and stable
7. Display grinding speed which can be adjusted at any time
8. Convenience for speed adjustment
9. Can polishing other similar products
| Standard polishing efficiency (R20 convex surface polishing) : | |
| Standard polishing time (excluding adhesive removal) | |
| Grinding | 50 second |
| Polishing | 50 second |
| Finishing | 40 second |
| Polishing process | 4 steps (excluding adhesive removal) |
| Return loss | 40 dB or more |
| End curve radius | 10 to 25 mm (0.394 to 0.984 inch) |
| End curve offset | 50 um (0.00197 inch) or less |
| Fiber under-cut | 0.1um or less |
| Noise | 60 dB (A) or less |
| General specifications: | |
| Power supply | 220/240 VAC, 50/60 Hz |
| Power consumption | 55 W |
| Operating temperature | 0° to 40 °C (50°to 104°F) (noncondensing) |
| Physical dimensions | 220 (W) 340 (D) 480 (H) mm |
| (with fiber holder at the lowest position) | |
| Weight | approximately 21 kg |
| Timer | 0 through 99 min. 99 sec. (Unit: second) |
| Operating environmental specifications : | |
| Operating temperature | 0° to 40 °C (50°to 104°F) (noncondensing) |
| Relative humidity | 15% to 85% |
| Vibration | operating: 0.25 G 5 to 100 Hz 10min. |
| powered-off: 0.50 G 5 to 100 Hz 20min. | |
| Acceptable impact | 50 mm (1.97 inch) drop (one side) |
| Storing environmental specifications : | |
| Storing temperature | -25°to 65°C (8°to149°F) (noncondensing) |
| Relative humidity | 15% to 85% |
Orders would be shipped within 3 working days upon receiving cleard payments when stock lasts. Delievery time depends on the shipping method, the following is the typical time:
Faster courier(Such as EMS, DHL, UPS...) would take 3-7 days;
Air mail(Hong Kong air mail, Singapore air mail) would take 10-20 days.
Package might be delayed occasionally by the Customs or the carrier, we sincerely hope each customer could give a few more days when this happens Beijing W&F technology Co.,LTD is founded in 2006. It is a hi-tech company specialized in manufacturing and trading fiber splicing machine and testing equipments . Our company is one of the biggest communication test instrument suppliers which is located in Beijing - the capital of China.
We could supply Fujikura, Sumitomo, Fitel, Yokogawa, JDSU,EXFO, Shineway, KL, and W&F Chinese, and accessaries for fiber optic equipments.
You are always welcome to contact us!
Ms. Betty Cao
Skype :bjwftd2