OEM SNMP Managed Fast Ethernet Media Converter
Overview
HiOSO FC830AM Series belongs to 10/100M auto-adapted Fast Ethernet Fiber Media Converter with management function.(Or called Photoelectrical Conversion)Which support SNMP Protocol, Web windows administration, remote Telnet management, Com port and software upgrade. It can supervise the working status and configure the mode of each local media converter in the slot and remote media converter connected to the other side.
10/100M Ethernet Fiber Converter is fully in compliance with 10Base-T, 100Base-TX,100Base-Fx and IEEE 802.3x International Standard etc. It can completely compatible with Network Card, Repeaters, HUB and SWITCH etc made by other suppliers, and also providing cost-efficient hardware support to the information transmission between Broad-Band Personal Net, Fiber Optical City Area Net.
Feature
- Supports SNMP management, Web address management and Telnet management
- Enable/Disable optical link-loss alarm function
- Four transmission modes are selectable
- Comply with IEEE 802.3u 100BASE-FX/TX, IEEE802.3 10BASE-T standard
- Comply with IEEE 802.1Q VLAN protocol
- Support 10/100M, Full/Half duplex auto-negotiation
- Support MDI/MDIX auto sense
- Support transmission distance of up to 120km (Dual-fiber)
- Support over-size packets of up to 1912 Byte
- Support hot-swappable
- The cards work as standalone and rack-based Media Converters
- Single-fiber and dual-fiber devices are available
Technical Data
Mechanical Parameters
Size | 32mm(H)* 165mm(W)* 128mm(D) |
Operating temperature | -10-- 55 C |
Storage temperature | -40-- 70 C |
Power supply | AC220V / DC-48V |
Optical Parameters
Multimode Fiber: 62.5/125, 50/125, 100/140μm | |
MM2km orMM5km | Output power: -20-- -18dBm |
Receiving sensitivity: -31dBm | |
Distance: 0~2km or 0~5km | |
Connector: SC(standard)/FC(optional) /ST(optional) | |
Type: dual-fiber | |
Wavelength: 850nm/1310nm | |
Single-mode Fiber: 9/125, 8.3/125, 8.7/125 or 10/125μm | |
25km
| Distance: 0~25km |
Output power:-15~-8dBm (dual-fiber),-14~-8dBm (single-fiber) | |
Receiving sensitivity: <-34dBm(dual-fiber), <-33dBm(single-fiber) | |
Connector: SC(standard)/FC(optional) /ST(optional) | |
Type: single-fiber / dual-fiber | |
Wavelength: 1310nm/1550nm(single-fiber),1310nm(dual-fiber) | |
40km
| Distance: 0~40km |
Output power: -10~-5dBm (dual-fiber),-9~-5dBm (single-fiber) | |
Receiving sensitivity: < -36dBm(dual-fiber),<-33dBm(single-fiber) | |
Connector: SC(standard)/FC(optional) /ST(optional) | |
Type: single-fiber / dual-fiber | |
Wavelength :1310nm/1550nm(single-fiber),1310nm(dual-fiber) | |
60km | Distance: 0~60km (when less than 15km, use attenuator) |
Output power: -5~0dBm(dual-fiber),-6~0dbm(single-fiber) | |
Receiving sensitivity: < -36dBm | |
Connector: SC(standard)/FC(optional) | |
Type: single-fiber / dual-fiber | |
Wavelength: 1310nm/1550nm(single-fiber),1310nm(dual-fiber) | |
80km | Distance: 0~80km (when less than 15km, use attenuator) |
Output power:-8~-2dBm(dual-fiber),-3~3dbm(single-fiber) | |
Receiving sensitivity: < -36dBm | |
Connector: SC(standard)/FC(optional) | |
Type: single-fiber / dual-fiber | |
Wavelength: 1310nm/1550nm(single-fiber),1550nm(dual-fiber) | |
100km | Distance: 0~100km (when less than 15km, use attenuator) |
Output power:-6~-1dBm | |
Receiving sensitivity: < -38dBm | |
Connector: SC(standard)/FC(optional) | |
Type: single-fiber / dual-fiber | |
Wavelength: 1310nm/1550nm(single-fiber),1550nm(dual-fiber) | |
120km
| Distance: 0~120km (when less than 15km, use attenuator) |
Output power:-5~0dBm | |
Receiving sensitivity: < -38dBm | |
Connector: SC(standard)/FC(optional) | |
Type: dual-fiber | |
Wavelength: 1550nm |
Certificates