<:article id=richTextContainer>
Specifications
10/100/1000M single fiber dual-direction CWDM singlemode media converter:
1310/1550nm ,40KM ,SC/ST/FC
CE certificate
10/100/1000M single fiber dual-direction CWDM singlemode media converter
This series of fiber media converter adopted powerful ASIC Chip, Simple design, high reliability, low power consuming and so on. Use high-quality optical transceiver module, optical properties provide good electrical characteristics, to ensure reliable date transmission, long working life. This converter support transmit distance have following types: 2km (multi mode), 20KM,40KM,60KM,100KM,and 120KM.
Support Alarm function can be reminded of the link failure occurs and prompts fault location in time, and to force the Ethernet port link power interruption. Built-in 8 bit DIP switch, user’s easily adjust the various of transmission and working mode and choose whether to open link alarm function.6 LED indicator, can dynamic feedback link connection state and fault detection.
Produce feature:
According to IEEE802.3,IEEE802.3u,10/100Bast-TX,100Base-FX standard.
Support IEEE802.3X flow control function.
Ethernet port support 10/100M,full-duplex and semi duplex auto-negotiation.
Ethernet port Auto-MDI/MDIX auto flip, parallel/across twisted-pair auto-negotiation.
Support storage transmission and direct transmission.
Ultra-low time-delay data transmission, completely transparent to the network protocol.
Built-in 288KB RAM data buffer,suport 2046Bytes long data packet.
50/125um or 62.5/125um multimode fiber link transmission distance up to 550meter and 2KM.
9/125um single mode fiber link transmission distance up to 120KM.
Modulization configuration design, chassis support power supply for cassette media converter.
Support hot-swappable, plug and play.
6LED indicators,dynamix feedback link connection state and fault detection.
Built-in lightning protection circuit, significantly reduce the damage caused by thunderbolt induction.
Average working time more than 100,000 hours without failures.
Basic features:
Item | Specification/Term | |
1 | Item number | APT-103 Series |
2 | Standard | IEEE802.3,IEEE802.3u,10/100Base-TX,100Base-FX |
3 | Flow control | IEEE8.2.3x port flow control and backpressure control |
4 | Transmission speed | 10M/100M auto-negotiation |
5 | Transmission mode | Full-duplex and semi duplex(auto-negotiation) |
6 | Conversion mode | Media conversion, storage transmission, direct transmission |
7 | MAC address | 1K |
8 | Buffer space | 288KB |
9 | Packet length | Storage transmission:2046Bytes,straight-through,infinite. |
10 | Time-delay | 9.6us |
11 | Bit error rate | <1/1000000000 |
12 | MTBF | 100,000 hours |
13 | Power supply | AC100~265V 50/60Hz / DC5V 1A |
14 | Power dissipation | <2.5W |
15 | Interface | Electric port:RJ45,Fiber port: SC/FC |
16 | Twisted-pair | Cat.5, Cat.6, directs wire and cross wire. |
17 | Multimode fiber | 50/125,62.5/125um |
18 | Single mode fiber | 8/125,8.3/125,9/125um |
19 | Wavelength | 850nm/1310nm/1550nm |
20 | Transmission distance |
|
| 1)dual fiber multimode | 550M/2Km |
| 2)dual fiber single mode | 20/40/60/80/100/120Km |
| 3)single fiber single mode | 20/40/60/80Km |
| 4)Cat.5 twisted-pair | 100m |
21 | Operating temperature | 0~50°C |
22 | Storage temperature | -20~70°C |
23 | Humidity | 5%~90% (no condensation) |
24 | Size | 95*70*26mm (L*W*H) (external power supply) 140*110*30mm(L*W*H)(Built-in power supply) 115*88*25mm(L*W*H)(Built-in power supply) 117*86*27mm(L*W*H)(Built-in power supply) 158*128*32mm(L*W*H)(Built-in power supply) |
