40KM Built-In Media Converter:
Name: 10/100/1000M self-adapt fiber optic media converter
Type: APT-1124WS34/54MC
Scale: 10/100/1000M CWDM media converter
Single-fiber dual-direction fiber optic media converter can be used to Ethernet's
electricity signal transmit to photosignal's photoelectricity signal's transceiver.
It uses one fiber to transmit and receive photosignal in-phase. Less than dual-fiber
media converter for one fiber but can enhance one double transmit energy,
and economize optical fiber cable resource.
APT-1124WS34/54MC single mode single-fiber is 10/100/1000M self-adapt single fiber
dual-direction fiber optic media converter. It's completed according to IEEE802.3ab,
IEEE802.3u, 10BaseT, 100BaseTX, 1000Base-TX, 1000Base-SX, and 1000Base-LX standards.
APT-1124WS34/54MC single mode single fiber is a single gigabit single fiber media converter. Due to single fiber dual-direction media converter's photosignal transmit wavelength and receive wavelength are different, so must be used by pair. One TX
and one RX is one pair. Can't be used wrongly, or it won't work normally. Single mode single fiber's transmit photosignal wavelength is 1,550nm and receive photosignal wavelength is 1,310nm. Single fiber dual-direction media converter has one RJ-45 interface and one SC single fiber interface, separated for twisted-pair and fiber to connecting. Single fiber media converter has 6 LED indicators, POWER, SPDFX1000, SPDTX1000, FX Link/Act, TX Link/Act and Fdx.
Technical parameters:
1. Complies with IEEE802.3ab/z, IEEE 802.3u, IEEE802.3X, IEEE802.1Q, 10BASE-T, 100BASE-TX, 1000BASE-TX, 1000Base-SX, and 1000Base-LX standards
2. Supports TCP/IP, PPPOE, DHCP, ICMP, and NAT protocol
3. Flow control: full-duplex adopt IEEE802.3X, half-duplex adopts backpressure standard
4. Electricity port supports auto-negotiation function, auto conditioning transmit mode and transmit speed
5. Port supply Auto-MDI/MDIX automatic reverse
6. Supports storage transmit mode, cashe capability is 256K
7. Supports electricity port's 1,000M mode or self-adapt mode's switch
8. Supports state indicator, external power (output 5V 50Hz 1A)
9. Interface: electricity port: RJ-45, fiber port: SC
10. Twisted-pair: Cat.5, Cat.6
11. Single mode fiber: 8/125, 8.3/125, 9/125um
12. Working temperature: 0 ~ 50 degrees
13. Storage temperature: -20 ~ +70 degrees
14. Humidity: 5% ~ 90%
15. Size: 32 * 128* 158mm (H * W* L)
Specifications:
1. Connect type: SC
2. Fiber type: single mode
3. Wavelength: 1310/1550nm
4. Typical distance: 40km
5. Min. TX PWR: -6.0dBm
6. Max. TX PWR: 0.0dBm
7. Sensitivity: <-22dBm
8. Link budget: 16.0dBm
