Framed 4E1 to1ETH Converter Ethernet Protocol Converter FE1 G.703 to V.35 Interface Converter
This interface converter is based on FPGA,using reverse direction multiplexing technology to bundle for multiple E1 circuits to transmit the Ethernet data of 100BASE-TX. It can realize 1-8E1 channel to convert between Ethernet optical
interface. This device can transmit the transceiver signal point to point to Ethernet optical interface to make E1 channels interconnected with Ethernet optical interface. Unlike general remote network bridge, this device can support 1-4Channel E1 channel configuration, can automatically detect the number of E1 and select the E1 available. It allows E1 lines transmission time delay difference
Based on self -copyright IC
� To achieve Ethernet data transparent transmission in 1-4E1 circuits
� Can realize the local and the remote device reset
� Ethernet Interface is 100BASE-FX, support VLAN protocol
� Inter-set dynamic Ethernet MAC address (4,096) with local data frame filtering function
� Single Channel lines rate is 1984Kbit/s, 4Channel Bandwidth is up to 7936Kbit/s
� Support all set of Ethernet Work Mode
� CRC automatic alarm threshold can be set to isolate the poor quality transmission lines and cut off a
single-direction. When 2M branch circuit one direction error rate exceeds threshold, cutting off this
direction the other direction is not affected; that is to say, both of the Ethernet direction transmission can
be asymmetric
� Allow 4Channel E1 transmission time delay difference 100ms. When the margin exceed the allowed
range, the system can automatically stop on the E1 that time delay is too large to send data
� E1 interface conform to ITU-T G.703, G.704 and G.823, not support the use of signal time slot
� E1 interface module with inter-set clock recovery circuit and HDB3 code circuit
� Support E1 channel hot-plug in the device, and automatically detects the effective E1 channel and will
not interrupt data transmission
� Can support 1-4Channel E1 channel configuration, can automatically detect the number of E1 and
select the E1 available
E1 Interface
Interface Standard: comply with protocol G.703;
Interface Rate: n*64Kbps±50ppm;Interface Code: HDB3;
E1 Impedance: 75Ω (unbalance), 120Ω (balance);
Jitter tolerance: In accord with protocol G.742 and G.823
Allowed Attenuation: 0~6dBm
Power
Power supply: AC180V ~ 260V；DC –48V；DC +24V
Power consumption: ≤10W
Shenzhen BTON Weiye Technology Co., Ltd is one of the powerful and high-tech companies specialized in researching, manufacturing and marketing of optical and fiber communication technologies. Our major products are media converter, digital video optical transmission systems and Optical Transceiver Modules .All of these products are widely applied in many industries like telecom ,traffic, government organization, campus network ,oil industry, electric power system, and public security etc. B&TON is one of the biggest and fastest growing multi products manufacturing and service provider(including OEM,ODM service and customized) in Shenzhen China