EXFO FPM-302/FPM-302X Power Meter PRICE
EXFO Optical Power Meter FPM-300 series (FPM-302/FPM-302X)
Include FPM-302 and FPM-302X
10 dBm to -50 dBm
26 dBm to -35 dB
Model | FPM-302 | FPM-302X |
Power meter port | Ge | GeX |
Power range(dBm) | 10 to −60 | 26 to −50 |
Range displayed (dBm) | Down to −65 | Down to −50 |
Number of calibrated wavelengths | 10 | 10 |
Power uncertainty | ± 5 % ± 1 nW | ± 5 % ± 10 nW |
Resolution (dB) | 0.01 | 0.01 |
Automatic offset nulling | Yes | Yes |
Warmup time(s) | 0 | 0 |
Display units | dB/dBm/W | dB/dBm/W |
Automatic wavelength recognition | Yes | Yes |
Screen refresh rate (Hz) | 3 | 3 |
Tone detection (Hz) | 270, 1 k, 2 k | 270, 1 k, 2 k |
Battery life (hours) (typical) | > 300 | > 300 |
Warranty and recommended calibration interval (years) | 3 | 3 |
General Specifications | ||
Size (H x W x D) | 18.5 cm x 10.0 cm x 5.5 cm | 71/4 in x 4 in x 21/8 in |
Weight | 0.4 kg | 0.9 lb |
Temperature operating | -10 °C to 50 °C | (14 °F to 122 °F ) |
storage | -40 °C to 70 °C | (-40 °F to 158 °F) |
Relative humidity | 0 % to 95 % non-condensing | |
NOTES
a. Guaranteed unless otherwise specified.
b. All specifications valid at 1550 nm and 23 °C ± 1 °C, with an FC connector.
c. In CW mode; sensitivity defined as 6 x rms noise level.
d. Wavelengths: 830 nm, 850 nm, 980 nm, 1300 nm, 1310 nm, 1450 nm, 1490 nm, 1550 nm, 1590 nm and 1625 nm.
e. Traceable to NIST; FPM-302X: up to 20 dBm.
f. From 10 dBm to –50 dBm.
g. From 26 dBm to –35 dBm.
h. Power of > –40 dBm for FPM-302, and of > –25 dBm for FPM-302X.
i. For ± 0.05 dB and temperatures of > 18 °C.
j. At 850 nm, 1300 nm, 1310 nm, 1490 nm, 1550 nm and 1625 nm; power of > –50 dBm for FPM-302, and of > –40 dBm (typical) for FPM-302X.
****************************************
Honserv basis: Honest,Service and Value.
Web: ATTN:JIM
Mobile / Viber /Whatsapp :008613728095480
Skype:honserv
1. FUSION SPLICER:
2.OTDR:
3. POWER METER (PPM-350c, FPM-300, HSV300-P);
4. Anritsu site master S331D, S331L, S331E, S332E.
5. Fiber cleaver (CT-30A/CT-05A/CT-06A/FC-6S), adapter, battery, electrode, connector, fiber tool kits
6. Fiber cable, patch cord, adapter, closure, pigtail, optical switch, patch panel, etc..
7.Maintainance and repair, calibration service for the EXFO, Sumitomo, Fujikura, Anritsu.