Japan splicing machine Fujikura fsm-60s upgrade to FSM-80S Fusion Splicer price
The FSM-80S is core-to-core alignment single fiber splicer succeeding to FSM-60S. In addition to ruggedized concept, which 60S created, the 80S has a series of new features, such as "Automated wind-protector and tube-heater" for quicker splicing cycle as well as fewer operation steps, "innovative carrying-case design" for
quicker preparation, "powerful Li-ion battey" for longer operation, high resolution bigger LCD monitor, and "built-in operation manuals" in various languages. Market is from backbone network installation to opto-electronics components production for quality splice.
Applicable fibres | SM (ITU-T G.652 & G.657), MM (ITU-T G.651),DS (ITU-T G.653), NZDS (ITU-T G.655),Others |
Fibre Count | Single |
Cladding diameter | 80 to 150μm |
Coating diameter | 100 to 1000μm |
Fibre cleaved length | 5 to 16mm using Sheath Clamp A, B or 5 to13mm using FH-60-250, FH-60-900 |
Actual average splice loss | 0.02dB with SM, 0.01dB with MM, 0.04dB with DS, 0.04dB with NZDS. |
Splice time | 7sec:SM FAST mode, 12sec :SM AUTO mode, 15sec:AUTO mode |
Return loss | 60dB or greater |
Splicing modes | 100 splicer modes are available |
Splice loss estimate | Several types of core deformations as well as core axis offset are taken into account for accurate loss estimate. |
Attenuation splice function | Intentional high splice loss of 0.1dB to 15dB (0.01dB step) can be made for an inline fixed attenuator |
Storage of splice result | The last 2000 results to be stored in the internal memory. |
Magnification | X / Y (300X magnification), or both X and Y simultaneously (160X magnification) |
Viewing method | By two CMOS cameras for intersecting fiber viewing and 4.73 inches TFT colour LCD monitor |
Tension test | 1.96 to 2.25N |
Operating condition | 0-5000m above sea level, 0-95% RH and -10 to 50°C respectively. |
Tube heater | Built-in auto-start tube heater with 10 heating modes and up to 20 for reference |
Tube heat time | 13-15sec. with FP-03 protection sleeve. Total memory of 30 heating modes are available |
Applicable protection sleeve length | 60mm, 40mm and a series of micro sleeves. |
No. of splice/heating with battery | 200 times of splicing and heat shrinking under with BTR-09 |
Power supply | Auto voltage selection from 100 to 240Va.c. or 10 to 15Vd.c. with ADC-18. 14.8Vd.c. with BTR-09 |
Terminals | USB2.0 ( Mini-B) for data and video signal transfer to PC. |
Wind protection | Up to 15m/s wind velocity |
Dimensions | 146(W) x 159(D) x 150(H) mm Including wind protector, monitor, and rubber protector Excluding rubber foot |
Weight | 2.5 kg, with ADC-18 AC adaptor 2.7 kg, with BTR-09 battery |
Electrode life | 3000 arc-discharges |
Item | Description | Model No. | Qty |
1 | Fusion Splicer | 80S with CLAMP-S70A | 1 pc |
2 | AC adaptor/battery charger | ADC-18 | 1 pc |
3 | AC power cord | ACC-XX | 1 pc |
4 | Spare Electrodes | ELCT2-20A | 1 pair |
5 | Cleaver | CT-30A | 1 pc |
6 | Battery Pack | BTR-09 | 1 pc |
7 | USB cable | USB-01 | 1 pc |
8 | Quick reference guide | M-80S/19S-E | 1 pc |
9 | Warning and cautions | W-70-E | 1 pc |
10 | Instruction Manual | M-70 | 1 pc |
11 | Alcohol Pot | AP-01 | 1 pc |
12 | Battery charge cord | DCC-18 | 1 pc |
13 | Carrying Case | CC-30 | 1 pc |
14 | Screw Driver | SD-01 | 1pc |
JAPAN Fujikura FSM-60S Fusion Splicer are in promotion!
JAPAN FSM-60S Fusion Splicer
The FSm-60S fusion splicer sets the standard for core alignment fusion splicing by incorporating a user-friendly interface with enhanced features to provide the most rugged and reliable fusion splicer in the market today. The new rugged construction adds improved reliability by resisting shock, dust, and rain, and can withstand a 30” drop test.
The FSm-60S splices a fiber in 9 seconds and heats a 60mm splice sleeve in 30 seconds, for a total cycle time of only 39 seconds. New features, such as automatic tube heater operation, user-selectable clamping method (sheath clamp or fiber holder system), automated monitor image orientation, and battery charge capability during splicer operation provide the end user a productivity tool they can count on.
Features
• Rugged construction providing shock, dust and moisture resistance
• Dual monitor position with automatic image orientation
• Automatic arc calibration and fiber identification
• User-selectable fiber clamping method – sheath clamp or fiber holders
• Auto-start tube heater feature
• Color LCD display with anti-reflective coating for excellent visibility in bright sunlight
• Simultaneous battery charge and splicer operation
• Long life battery (up to 160 splice/heat cycles per charge)
• Detachable work table incorporated into the transit case
• Data and video download software and splicer upgrade software included; software upgrades through PC application via the internet
• Green friendly – RoHS & WEEE compliant
Fujikura FSM-60S With these accessories:
Arc fusion splicer FSM-60S: 1 pc
AC Adapter/Battery charger ADC-13- 1
AC Power Cord- 1
Spare Electrodes- 1 Pair
Carrying Case CC-24-60S- 1
USB Cable USB-01, 1
J-Plate JP-05: 1
Instruction Manual- 1
BTR-08, Batery Pack- 1
DCC-14 Battery Pack- 1
DCC-13, DC PowerCord-1
CT-30A, High Precision Fiber Cleaver-1
Our main products as below:
1. FUSION SPLICER:
COMWAY (C10, C8 )
Sumitomo (Type-81C/66);
Fujikura (FSM-80S/60S/60R/70R);
Furukawa Fitel S178A;
2.OTDR:
EXFO (FTB-1/AXS-110/MAX-710B/715B/720B/730B/ FTB-200/FTB-500);
JDSU (MTS-2000/4000/6000/8000);
YOKOGAWA (AQ7275)
3. POWER METER (PPM-350c, FPM-300, HSV300-P);
LIGHT SOURCE (FLS-300, HSV300-L);
VFL (FLS-241, HSV-321);
Multi Loss tester (FOT-930, FOT-302)
4. Anritsu site master S331D, S331L, S331E, S332E.
5. Fiber cleaver (CT-30A/FC-6S), adapter, battery, electrode, connector, fiber tool kits
6. Fiber cable, patch cord, adapter, closure, pigtail, optical switch, patch panel, etc..
7.Maintainance and repair, calibration service for the EXFO, Sumitomo, Fujikura, Anritsu.
Any interest, pls add my skype : honserv or Mobile / Viber /Whatsapp :008613728095480!