Product: 1000Base-T SFP Transceiver telecom equipment
Baudcom’s BDTR-GB-PxRC Copper Small Form Pluggable (SFP)transceivers is high performance, cost effective module compliant with the Gigabit Ethernet and 1000- BASE-T standards as specified in IEEE 802. 3-2002 and IEEE 802.3ab, which supp- orting 1000Mbps data- rate up to 100 meters reach over unshielded twisted-pair category 5 cable. The module supports1000 Mbps full duplex data-links with 5-level Pulse Amplitude Modulation (PAM) signals. All four pairs in the cable are used with symbol rate at 250Mbps on each pair. The module provides standard serial ID information compliant with SFP MSA, which can be accessed with address of A0h via the 2wire serial CMOS EEPROM protocol. The physical IC can also be accessed via 2wire serial bus at address A0h.
- Up to 1.25Gbps bi-direction data links
- 100m transmission over unshielded twistedpair (UTP) Category 5 Cable
- Support intelligent auto-negotiation 1000BASE-T operation in host systems with
- SGMII interface
- Hot-pluggable capability
- SFP/GBIC form with compact RJ-45 connector
- Very low EMI and excellent ESD protection
- +3.3/5V Single power supply
High-Speed Electrical Interface Transmission Line-GBIC | ||||||
Parameter | Symbol | Min | Typ | Max | Units | Notes/Conditions |
Line Frequency | fL | 125 | MHz | 5-level encoding, per IEEE 802.3 | ||
Tx Output Impedance | Zout,TX | 100 | Ohm | Differential, for all Frequencies between 1MHz and 125MHz | ||
Rx Input Impedance | Zin,RX | 100 | Ohm | Differential, for all Frequencies between 1MHz and 125MHz |
High-Speed Electrical Interface, Host-GBIC | ||||||
Parameter | Symbol | Min | Typ | Max | Units | Notes/Conditions |
Single ended data input swing | Vinsing | 250 | 1200 | mV | Single ended | |
Single ended data output swing | Voutsing | 350 | 800 | mV | Single ended | |
Rise/Fall Time | Tr,Tf | 175 | psec | 20%-80% | ||
Tx Input Impedance | Zin | 50 | Ohm | Single ended | ||
Rx Output Impedance | Zout | 50 | Ohm | Single ended |
General | ||||||
Parameter | Symbol | Min | Typ | Max | Units | Notes/Conditions |
Data Rate | BR | 10 | 1,000 | Mb/sec | IEEE 802.3 compatible. See Notes 2 through 4 below | |
Cable Length | L | 100 | m | Category 5 UTP. BER <10-12 |
Environmental Specifications | ||||||
Parameter | Symbol | Min | Typ | Max | Units | Notes/Conditions |
Operating Temperature | Top | 0 | 85 | °C | Case temperature | |
Storage Temperature | Tsto | -40 | 85 | °C | Ambient temperature |
Application:
- LAN 1000Base-T
- Switch to Switch interface
- Switched backplane applications
- Router/Server interface
Ordering information
BDTR-GB-P1RC | 10/100/1000Mbps, SGMII interface, Copper SFP with spring latch |
BDTR-GB-P3RC | 1000Mbps only, SERDES interface, Copper SFP with spring latch |
1000Base-T SFP fiber optic transceiver picture:
1.How can i get a fiber optic transceiver sample ?
You need place sample order to us.We will arrange the sample production for you.
2.Could you do design for us?
yes, we can do artwork including printing, logo etc. for you, if you provide us the content and tell us where to put.
3.How can we place order?
After we made agreement on the product' parameters, we will make proforma invoice for your confirmation.when we got your advance payment (deposit) we will arrange the production and delivery.
If you have your own ship forwarder, we will use your ship forwarder to delivery goods. if you don't have ship forwarder, then when the goods arrived at Destination port, you must find a ship forwarder help you clear the custom.
4.How about the shipping for fiber optic transceiver ?
For small orders, we will send the goods by International Express like HK Fedex, DHL, TNT or UPS. usually it takes about 7work days to arrive.If big quantity we will ship by Ocean transportation, it takes one month to arrive. if urgnet, you can select shipping by Air, but freight charge will be more expensive.
6.what's your products' advantages ?
A. good quality and competetive prices.
B. Strictly quality control when producing.
C. Professional team work, from design, development, producing,assemble,packing and shipping.
D. Aftersale services, if there is quality problem, we will offer you replacement for defective quantity.
The devices will be well packaged by carton with Foam or other shock proof materials.
Product testing
After-Sales Service
The goods warranty time is THREE years,we will provide best support by TEL,email,remote control or engineers in field.
Your any questions will be responsed within 12hours!