Introduction to CF420B Electric Hammer Mill
The hammer mill is fixed with an engine with a power of RP-driven all kinds of different power. Its working principle is: after the raw materials were put into crushing chamber, the high-speed operated hammer sheets will impact the raw materials over and over again, then the raw materials will be crushed into pre-set size step-by-step. The sieve have the following size: 1.5mm, 2mm, 4mm and 6mm. Then the crushed materials will leak out from the sieve. The draught fan will convey the leaked materials into separator centrifuge, finally, the powder will be discharged down.
Key Features of CF420B Electric Hammer Mill
1. With capacity 500-600kg/h, this hammer mill can satisfy a large production demand on a daily basis.
2. The ability to change screen size, and the option of a variable speed frequency drive control, enable processing a variety of materials using the same hammer mill.
3. Both coarse and fine grinding can be realized through adjusting the gap between hammers and screen.
4. The core part ---the hammer flake is scientifically designed to have two concussion parts, thus when one part is worn out, you can turn over to use the other part.
5. The angle of the screen can be 180° which allows for high throughput at lower power consumption.
6. Equipped with air blower, the crushed material can be directly collected and transported to next machine for further processing.
This CF600 hammer mill is newly developed machine which is endowed with many advantages compared to other kind of crushers such as simple construction, convenient operation, high efficiency, saving power consumption, and safe condition. It is suitable to crush raw and hard materials with big size such as tree branches, bamboo, wood scrap, wood brick,old cardboard and newspaper, straw, crop stalks and corn cobs and so on. After crushing, raw materials are uniform and with proper moisture content to meet further processing. With capacity 800-1100kg/h, it is can surely meet the production requirement in the farms, middle sized feeding factory or family.
| Model No. | Power Electric Engine 50HZ | Wood output(kg/h) | N/G weight(kg) | Sieve screen size | Sieve screen specification | Packing Size(cm) |
| CF158 | 1 phase 2.2kw | 60-120 | 75/95 | 360*160mm | 1.5-10mm | 48*58*63 |
| CF158 | 3 phase 2.2kw | 60-120 | 75/95 | 360*160mm | 1.5-10mm | 48*58*63 |
| CF198 | 3 phase 4kw | 200-300 | 120/140 | 510*200mm | 2-10mm | 90*58*102 |
| CF198 | 7.5HP gasoline engine | 200-300 | 120/140 | 510*200mm | 2-10mm | 96*62*105 |
| CF420B | 3 phase 7.5kw | 200-400 | 260/320 | 680*280mm | 1.8-10mm | 112*82*107 |
| CF420C | 3 phase 11kw | 200-500 | 320/360 | 680*280mm | 2-10mm | 112*82*107 |
| CF420A | 15HP Diesel engine | 300-500 | 330/360 | 680*280mm | 1.8-10mm | 147*73*109 |
| CF420A | 22HP Diesel engine | 300-500 | 350/390 | 680*280mm | 1.8-10mm | 147*74*111 |
| CF500A | 55HP Diesel engine | 800-1100 | 800/840 | 820*390mm | 2-10mm | 150*142*123 |
| CF500B | 3 phase 22kw | 800-1100 | 600/630 | 820*390mm | 2-10mm | 124*97*106 |
| Model No. | Power | Capacity kg/h | N/G weight(kg) | Sieve screen size | Sieve specification | Packing Size(mm) |
| CF600B | 30kw 3phase | 1500-2200 | 700/730 | 920*500mm | 2-10mm | 150*132*120 |
The Hummer Mill Cutter and Sieve
Wood hammer mills are able to crush both forestry and agricultural material, brittle and fibrous material, such as bamboo, stalk, grass and shrub. A screen with cutting edges is used to control the wood particle size. If the size is larger than screen, these material will be sent back to be grinded again until they can get though the screen. The size of the grinded material depend on the size of screen and the rotation speed .
Ready to exported
Kinds of materials
This wood hammer mill can be used in wood pellet production which can be used as animal bedding, heat fuel and fodder.
<img src="http://g01.s.alicdn.com/kf/HTB19e2dFVXXXXcRXpXXq6xXFXXX7/200672996/HTB19e2dFVXXXXcRXpXXq6xXFXXX7.jpg" alt="30kw processing manufacturing biomass corn hammer mill grinding machine" width="724" height="726" style="width: 538px; height: 523px; margin-right: auto; margin-left: auto; display: block;" ori-width="800" ori-height="800">
<img src="http://g02.s.alicdn.com/kf/HTB11YbuGpXXXXb7XFXXq6xXFXXXZ/200672996/HTB11YbuGpXXXXb7XFXXq6xXFXXXZ.jpg" alt="30kw processing manufacturing biomass corn hammer mill grinding machine" style="margin-right: auto; margin-left: auto; display: block;" ori-width="600" ori-height="800">
Our factory certification packing and shipping
<img src="http://g02.s.alicdn.com/kf/HTB1tnbtGpXXXXXTXFXXq6xXFXXXn/200672996/HTB1tnbtGpXXXXXTXFXXq6xXFXXXn.jpg" alt="30kw processing manufacturing biomass corn hammer mill grinding machine" ori-width="600" ori-height="900">
<img src="http://g02.s.alicdn.com/kf/HTB1VQVFFVXXXXcXXVXXq6xXFXXXK/200672996/HTB1VQVFFVXXXXcXXVXXq6xXFXXXK.jpg" alt="30kw processing manufacturing biomass corn hammer mill grinding machine" ori-width="709" ori-height="644"> After-sale Service
After-sale service can ensure a smooth business once you buy a machine aboard. You can inevitably encounter some operation problems while making wood pellets. We can offer you 12 months warranty for main parts to protect your interests and save your money.
<img src="http://g03.s.alicdn.com/kf/HTB1wwHzGpXXXXavXXXXq6xXFXXXu/200672996/HTB1wwHzGpXXXXavXXXXq6xXFXXXu.jpg" alt="30kw processing manufacturing biomass corn hammer mill grinding machine" ori-width="600" ori-height="600">
Contact information
Skype: chen.cealian
TEL:15805353812
QQ:383342040
Cyclone for hammer mill