Factory supplying powder production animal food mixer
Mixing is one of the most important operations in manufacturing of animal feeds. And mixer is considered to be the heart of feed milling operation. SLHSJ 0.5, named double shaft paddle mixer, is a kind of animal food mixer for mixing dry granules & powders. SLHSJ series animal food mixer is mainly used to mix the feed ingredients with other micro-ingredients such as vitamins, amino acids, trace elements and other feed additives in the feed pellet production process.
SLHSJ series powder mixer is one of the main products produced by Shandong Double Crane Machinery Manufacturer Co., Ltd.. Stainless steel and carbon steel mixer are choosable. It has characteristics of high efficiency, reasonable structure, compact layout, reliable performance and easy maintenance. And the finished powder after mixing makes the pellet production process much easier.
SLHSJ series powder mixer
1. Features & Advantages
a. Mixing time is short. The mixing time for one batch is generally 60-120s.
b. High efficiency and high uniformity. The CV is ≤5 percent.
c. Quick discharge with less residue. the large open door structure at the bottom makes sure the quick discharging.
d. The discharging door has reliable sealing property. The door uses the elastic rubber gasket to make sure the reliable sealing and durable in use.
e. The design of the machine makes it easy to assemble and maintain the machine. W type mixing chamber has air duct , integral engine base and has maintenance door at one side.
f. The machine is equipped with liquid addition equipment and can add even 30% of the liquird when mixing.
g. The chain uses triple chain structure. The transmission structure is special. The machine has more stable performance, larger transmission torque and lower consumption.
2. Technical parameter
Model | volume | Mixing capacity | Mixing times | uniformity | rpm | power | note | Size(L*W*H)mm |
SLHSJ0.5 | 0.5 | 0.25 | 60-120 | 5 percent | 34 | 7.5 | Air pressure > 0.4MPa | 1650×1750×1250 |
SLHSJ-1 | 1 | 0.5 | 60-120 | 5 percent | 34 | 11 | Air pressure > 0.4MPa | 2050×2185×1650 |
SLHSJ-2 | 2 | 1 | 60-120 | 5 percent | 34 | 18.5 | Air pressure > 0.4MPa | 2580×2970×2100 |
SLHSJ-4 | 4 | 2 | 60-120 | 5 percent | 34 | 30 | Air pressure > 0.4MPa | 2720×3275×2155 |
3. Working Principals
SLHSJ series food mixer is composed of two rotors in reverse rotating direction. paddles in special angle are welded on the rotors. The paddle bring the materials in counterclockwise rotation along the inside of the trough. and it also brings the materials to turn over from left to right. There is a weightlessness zone in the overlapping of the two rotors. In this zone, no matter the shape, size and density of the materials, all materials can be floating and in the sudden weightless state. This can make materials form all-around continuous circulatory flip. All the materials are mixed so that it gets the fast,soft and higher uniformity effect.
4. Product Application
SLHSJ series food mixer is widely used in the industries such as feed, grain, chenmical, medicine and pesticides. It can mix the powder, granule, sheet, lump, miscellaneour materials and viscous materials.
Double shaft paddle mixer can be used in the feed powder line production. It can use together with the bucket elevator to bring the raw materials to the inside of the mixer.
5. Main parts
6. Double Crane mixers show
Single shaft double screw mixer
Double screw paddle mixer
Vertical mixer
7. Production Certificates
Hammer mills, pellet mills and mixers made by Double Crane are mostly certified by SGS, ISO and CE.
Double Crane are able to choose a more adapted packing ways for you such as wooden case and iron case. Pls kindly tell us your idea, we will immediately design a better project with reasonable shipping charges and reliable packing to suit to your requirements.
a. Technical support online service provided.
b. Technical files service provided.
c. On-site training service provided.
d. Spare parts replacement and repair service provided.
Shandong Double Crane Mchinery Manufacturer Co., Ltd. was established in 2005. And the factory is located in Leling city, Shandong province and occupies over 60,000 square meters. There are more than 150 workers, 30 mechanical designers and experts and 3 sales team.
Adhering to the concept of green, eco-friendly environment and humanisum, by learning domestic and foreigh advancedd technology, we are dedicated to R&D, production and sale of feed machines, biomass energy machines nd organic fertilizer machines. Among them, hammer mills and feed pellet machine are both certified by SGS, CE and ISO 9001. Upon to now, our products have been already exported into more than 30 countries and regions in the world. They have been enjoyed a high reputation by clients with high quality, reliable service and nice performance.
Our factory and business are rapidly expanding in 2015. We sincerely hope to establish a new cooperative relationship with clients in the world. If you are such a client and interested in feed machines, pls don't hesitate and contact us soon.
Welcome to visit our website: http://www.shpelletmill.com.
1. Q: Are you a trading company or a manufacturer?
A: We are a manufacturer, which has almost 10 years of experience in this industry and be able to offer you the best price.
2. Q: How can I get to your company?
A: You can get a flight to Jinan Airport. We are just about 1 hours away from Jinan Airport.
3. Q: How long is your warranty period?
A: One Year (Calculated from the equipment arrives the customer’s side.).
4. Q: Will you send engineers to install the plant?
A: yes, but at an extra cost payable by the customer. Or you can get local contractors to do the commissioning and we send one supervising engineer.
5. Q: Have you sold your products to Europe?
A: Yes, We have designed and installed more than 1000 turnkey pellet lines. Many of our customers are from Europe, including Latvia, France, Greece, Romania, Lithuania, etc.
1. Which kinds of machines could you want?
2. What are you going to use this machine for?
3. What's the voltage and output of machines do you prefer?