Pellet type machine poultry feed manufacturing machine with CE
I. Introduction of poultry feed manufacturing machine:
***Our poultry feed manufacturing machine is widely used for producing grains into the pet feed (such as cat feed, dog feed, bird feed and so on) and the fish food (including floating fish feed and sinking fish feed). The puffing fish feed pellets can float on the water surface without dissolution for over 12 hours.
*** In order to meet different customer demand, we launched two types of machines: Dry type and Wet type.
The different between dry type fish feed machine and wet type feed pellet machine:
| Description | Dry type fish feed machine | Wet type fish feed machine |
| Working Principle | 1. Firstly, the material is sent into feeding device 2. Then they will be pressed by the screw shaft with high pressure and temperature which makes the raw material fully cooked and sterilized. 3. Finally pressed material will be formed into pellets by shaping mould. | 1. This type machine need a steam boiler as supporting device to work, extruder also install conditioner connected by pipes and boilers 2. Firstly, raw materials will get into the conditioner after grinded and mixed to pre-cooked quenched with steam; 3. Then enter into the extruder, squeeze into pellets. |
Corollary Equipment | none | Steam Boiler |
| Pellets | / | Pellets are more meticulous & good looking |
| Operation | Easy and Simple | A little complicated |
| Price | Low | A little higher than dry type |
| Capacity | Wet type machine has high yield than dry | type machine in the same power. |
2. Raw Material of poultry feed manufacturing machine
Our fish feed extruder is based on the raw material of corn meal, flour, Wheat middling, Wheat bran, rice bran, soybean meal, cottonseed meal, fish meal, bone meal, meat meal and etc. Then the material can be expanded to pellet feed which is different shaped, unique taste and rich nutrition, suitable for dog, cat, fish, bird, rabbit fox etc.
3. Technical parameters and Picture of poultry feed manufacturing machine
Dry type feed pellet machine
Model | Capacity (T/H) | Motor Power (kw) | Feeding Power (kw) | Screw Diameter (mm) | Cutting Power (kw) |
AZSG-40C | 0.03-0.04 | 5.5 | 0.4 | φ40 | 0.4 |
AZSG-50C | 0.06-0.08 | 11 | 0.4 | φ50 | 0.4 |
AZSG-60C | 0.12-0.15 | 15 | 0.4 | φ60 | 0.4 |
AZSG-70B | 0.18-0.2 | 18.5 | 0.4 | φ70 | 0.4 |
AZSG-80B | 0.2-0.25 | 22 | 0.4 | φ80 | 0.6 |
AZSG-90B | 0.32-0.35 | 37 | 0.6 | φ90 | 0.8 |
AZSG-120B | 0.5-0.6 | 55 | 1.1 | φ120 | 2.2 |
AZSG-135B | 0.7-0.8 | 75 | 1.1 | φ133 | 2.2 |
AZSG-160B | 1-1.2 | 90 | 1.5 | φ155 | 3.0 |
AZSG-200B | 1.8-2.0 | 132 | 1.5 | φ195 | 3.0-4.0 |
Wet Type feed pellet machine
Model | Capacity (T/H) | Main Power (kw) | Feeding Power (kw) | Screw Diameter (mm) | Cutting Power (kw) | Conditioner Power (kw) |
AZSS-60B | 0.18-0.2 | 15 | 0.4 | φ60 | 0.4 | 0.75 |
AZSS-70B | 0.25-0.30 | 18.5 | 0.6 | φ70 | 0.6 | 0.75 |
AZSS-80B | 0.35-0.40 | 22 | 1.1 | φ80 | 0.8 | 1.1-1.5 |
AZSS-90B | 0.50-0.60 | 37 | 1.1 | φ90 | 1.1 | 2.2 |
AZSS-120B | 0.70-0.80 | 55 | 1.1 | φ120 | 1.5 | 2.2-3.0 |
AZSS-135B | 1.0-1.2 | 75 | 1.5 | φ135 | 2.2 | 3.0-4.0 |
AZSS-160B | 1.8-2.0 | 90 | 2.2 | φ155 | 2.2-3.0 | 4.0-5.5 |
AZSS-200B | 3.0-4.0 | 132 | 2.2 | φ195 | 3.0-4.0 | 5.5 |
4. Features of poultry feed manufacturing machine
1) Pellets can keep floating for 24 hours without pollution to water.
2) Our floating fish feed pellet machine can make pellet from dia.1.0mm-20mm just by changing the mold.
4) The cutting device can make pellets of different length.
5) The wet type floating fish feed pellet machine needs a boiler device.
6) We can provide whole floating fish feed making machine plant for you
7) Electric heating device is adopted which can improve the feed expansion rate and pellets floating time.
8) High temperature and high pressure cooking process can kill the salmonellosis and bacterial infections and also makes the pellets easily to digest.
5. Finally production of using our poultry feed manufacturing machine
1. The floating time can reach 24 Hours, which can be seen clearly by you and it won’t waste feed.
2. It’s easy to be digested for animals, especially fish.
3. The sterilization effect of fish feed extruder is better to avoid gastrointestinal disease.
4. Aquaculture feed are generally required to put in water, and aquatic animal feeding time is longer, in order to reduce the feed loss in the water and water pollution, the feed is maximized the stability of the feed in the water.
6. Feed pellet machine line
The fish feed extruder line is goes as follows:
Material crushing----mixing----pellets extruding---pellet drying---pellet cooling---pellet packing.
1) Crusher----To crush the raw material into powder. The powder fineness kept in 60-80 mesh.
2) Mixer -------To make all kinds of powder mixed evenly. The moisture content of the powder is 20%-25%.
3) Extruder----To make many kinds of feed pellet. Such as fish feed (floating tpye and sinking type), pet feed.
4) Dryer--------To remove the extra moisture of the pellet.
5) Cooler------ To reduce the temperature of the pellet after dring.
6) Packaging-- After cooling the feed pellet, we could package it.
*** Except all above machines, this line will need other equipment, such as storage bin, conveyor, Pneumatic conveying systems, unloader, fans, hanging feeder and so on.
*** We could help the customers to design the whole fish feed production line for floating fish feed production, and make sure the automatic operation with electric control, meet the demand of commercial production.
1. The feed pellet machine will be sent to you by sea, by air or even by International courier service.
2. The dievery time is usually 20-25 days upon receipt of your depoist or LC.
1. The warranty time is one year from the date you get the feed pellet machine, except the easy-wear parts.
2. If any parts are found defective in quality in the first year, we shall replace it freely.
3. We are responsible for the smooth operation of the feed pellet machine. If you have any problem during production, just feel free to contact us. We assure you our soonest response.
Zhengzhou Azeus Machinery Co., Ltd is a professional supplier of the different kind of feed pellet machine. Our products has been exported to all over the world, Especially to Europe, North and South America, Africa, East and South Asia, Australia, New Zealand, etc.
Through our joint efforts, we have gained good reputation from our clients in communication, products quality, delivery, after-service, and other aspects.
We are looking forward to establishing a long-term and mutual-benefit business relationship with all of you. We will assure you our competitive price with better quality and service. We believe you will get what you expect from our company.
7. FAQ of our poultry feed manufacturing machine
1. What is the size of the feed pellet machine?
- the fish feed pellet is 0.9-15mm size, you can choose the size you prefer.
2. The floating fish feed pellet machine is a single machine or a complete production line?
-It is depend on your chooice. the fish feed extruder can working seperatly, also in a production line, from material crushing to final pellet packing. You can choose it freely.
3. What is the delivery time of the feed pellet machine?
- Usually the single machine can be sent within 15 days after getting the deposit. If it is a large order or production line, the time maybe longer.
8. We will appreciated if these following 2 tips contained in your inquiry
Tips 1. The model you prefer is:
Tips 2. The capacity of the machine you need is:
9 . Please feel free to ask us any questions with our poultry feed manufacturing machine