Specifications
Counterflow cooler:1 Stainless steel roof
2,Widely suitable for any material
3,High cost -effective
4,Effect cooling
We are manufacturing counter flow cooler, swing cooler, stabilizer-cooler,cooler,cooling machine, cooling equipment for exportation.
SKLB Feed Cooler
Features
It is mainly used for cooling of pellet feed in the feed pelleting section. It cools the pellet feed coming from pellet mill and with a temperature of 70°C-90°Cto a temperature 3°C~5°C slightly higher than ambient temperature, and is capable of lowering to a safety moisture content. The cooled pellets not only improve the pellet firmness but also can prevent from going mouldy, that it is good for the transportation and storage of pellet feed.
• The counter flow cooling principle is adopted to cool the pellets with high temperature and moisture. Hot air touches hot pellets and cool air touches cool pellets so as to avoid the pellet surface crack caused by sudden cooling produced by direct touching between cool air and hot pellets. At the Same time, The airlock is used for feeding and space of air inlet bigger,therefore it can get better cooling effects.
• Slide reciprocating discharger has smooth and reliable discharging,low residue.
• Low pow consumption, easily operation.
Main Technical Parameters
Model | SKLB1.5 | SKLB2.5 | SKLB4 | SKLB6 | SKLB8 |
Volume(m3) | 1.5 | 2.5 | 4.0 | 6.0 | 8.0 |
Capacity(t/h) | 3 | 5 | 10 | 15 | 20 |
Cooling time(min) | Less than 10-15Mins | ||||
Temperature after Cooling(°C) | Not higher than ambient temperature +3~5 | ||||
Aspiration(m3/min.t) | 34 | ||||
Power(kw) | 0.75 | 1.10 | 1.50 | 1.50 | 1.50 |
Power of Airlock (kw) | 0.55 | 0.75 | 1.1 | 1.5 | 1.5 |
| About HME | |
|
| Questions | |
|
| Exported Equipment | |
|
| Our Project | |
|
| Certification | |
|
.