Single-effect sugarcane juice evaporator of 500kg/h evaporation capacity

Application:

 

It's applicable for dairy products, pharmacy, glucose, starch,chemical industry,  xylose, citric acid, ammonium sulfate, biological engineering, environmental engineering and waste liquid recovery and treatement. etc.

Equipment structure:

It consists of (first-effect, second-effect, third-effect)separators and evaporators and preheaters,condenser and vaccum pump, feeding pump,circulation pump, discharge pump, condensed water pump and system pipe fittings, etc. Equiped wit CIP spraying cleaning ball, vacuum gauge, thermometer,pressure gauge,and so on.

Equipment characteristics:

1. Material: SUS304 or SUS316L;
2.Full closed process, fast and low temperature evaporation;
3.Inside pipes are mirror polishing seamless sanitary pipes, so material is not easy to paste on the pipe all, it's easy for cleaning;

4.Low steam consumption: 1kg steam can evaporte 3.5kg water;

5.Low evaporation temperature:part of secondary steam can be inhaled into single-effect heater through spray type hot pressure pump, this would make full use of the heat and the evaporation temperature is low.

6.Large concentration ratio: adopt falling film evaporation, which make the material liquid with larger viscosity be easy to flow and evaporate, hard to scale,  short cocentration time, the concentration ratio can reach to 1:5.

7.This equipment  can realize automatic production, intellectual system management, which is in conformity with GMP standard.

8.Can be desinged into different technological process according to the different characteristics of the materials , also can according to different users' requirements equip with automaticl control system.

SPECIFICATION	LJN500	LJN1000	LJN1500	LJN2000	LJN3000		LJN5000	LJN6000	LJN8000
Evaporating capacity(kg/h)	500	1000	1500	2000	3000		5000	6000	8000
Steam pressure(Mpa)	0.1~0.25
Steam cost(kg/h)	185	370	555	740	1110		1850	2220	2960
Recycling water cost(t/h)	5	10	13	15	18		25	30	40
Weight(kg)	2060	2480	3280	4200	4860		5770	6430	7600
Dimension(mm)	7080* 900* 3500	7680* 1000* 4000	8380* 1100* 4600	8890* 1200* 4600	9500* 1300* 4900		10200* 1400* 5300	10800* 1500* 5800	11500* 1600* 5800
		Vacuum degree(MPA)				Evaporation temperature(c)
First effect		-0.047~-0.052				80-85
Second effect		-0.069~-0.072				70-75
Third effect		-0.075~-0.081				45-52