DTSD1352-4S Technical Parameter |
Auxiliary Power | AC/DC 85~265V; power consumption≤10VA |
Input Signal
| Frequency | 45~65Hz |
Voltage
| Rated value: AC 3×220V/380V |
Overload: 1.2 times rated value (continuous); 2 times rated value/1 second |
power consumption: ≤ 0.5VA(each channel) |
Current
| Rated value: Secondary input rated current:50mA |
Overload: 1.2 times rated value (continuous); 10 times rated value/1 second |
power consumption: ≤ 0.5VA(each channel) |
Measurement Accuracy
| Frequency: 0.05Hz, voltage and current: 0.5 class, active energy: 1 class, reactive energy: 2 class; 2nd to 31st harmonic accuracy: ±1% |
Function
|
Pulse output
| Output method: optocoupler pulse with open collector,the pulse constant defaults to 400imp/kWh (and active open input can only be either-or.) |
communication | RS485 interface, Modbus-RTU protocol; baud rate 1200~38400 |
Switch
| Input | 2-way or 4-way passive dry contact input, built-in power supply; 2-way active wet node input (AC220V), identify the oil generator and mains access (and pulse output can only be either-or.) |
Output | Output method: relay normally open contact output; Contact rating: AC250V/3A DC 30V/3A |
Safety | Power frequency withstand voltage | >AC 2kV/1min |
Insulation resistance | Input and output terminals to the chassis >100MΩ |
Environment
| Operating temperature:-20℃~+60℃; Storage temperature:-40℃~+70℃; Relative humidity:≤95% no condensation; Altitude:≤2500m; |
Electromagnetic Compatibility | better than 3 class |