Specifications
Optional configuration:1.Switch remote input
2.Switch remote output
3.analog output.
4.1 or 2 road power pulse output.
Product Overview:
This Product is designed according to power monitoring requirements of power systems, industrial and mining enterprises, public facilities, intelligent Building, etc. It can measure all common power parameters, such as three-phase voltage, current, active power, reactive power, frequency, power factor, four quadrant electricity, etc. It has LCD and LED these two kinds of display mode with wide angle of view and white background. All parameters can be set through the display panel buttons. The digital meter measures parameters and running status information of grid system. This meter panel has four programmable keyboards, so that the users can realize display switch, meter’s parameters programming setting easily. It is highly flexible.
This meter is high cost-effective, and it can replace conventional power transmitter, measuring and indicating meter, electric energy measuring meter and related auxiliary units. As a advanced, intelligent ,digital grid front-end collection element, this meter is widely applied to various control systems, SCADA system and energy management system, substation automation, power distribution automation, community power monitoring, industrial automation, intelligent building, intelligent switchboards, switchgear ,etc. This meter can be installed, wired, maintained easily and conveniently. It has small amount of engineering, and it can set input programmable parameters. It can realize network of PLC and industry control computer software.
Standard Configuration:
1.The meter measures three-phase voltage, three phase current, active power, reactive power, power factor, frequency, active power (accumulation) and the reactive power (accumulation) on the electrical grid.
2. Standard CT, PT or voltage signals are input directly
3. A wide range of AC-DC general power AC/DC80-265V or AC 220V
4. It has LCD and LED these two kinds of display mode with wide angle of view and white background. All parameters can be set through the display panel buttons.
5. It has RS-485 communication interface (optically isolated), Mod Bus RTU communication protocol.
6. It uses the installation of disk opening with a hole.
Dimension:120*120mm 96*96mm
Hole size: 112*112mm 91*91mm
Optional configuration:
- Switch remote input
- Switch remote output
- analog output, DC4-20mA DC0-20MA DC0-5V
- 1 or 2 road energy power pulse output.
Technical indicators:
Order example:
Example 1: Three-phase network multifunction power meter
Signal input: AC380V (input voltage) 100/5A (Current ratio)
Connection mode: three-phase four-wire
Power supply: AC220V or AC/DC80-265V
Other: (In accordance with the default factory settings if not stated)
Example 2: Three-phase network multifunction power meter
Signal input: AC10/0.1KV (input voltage)100 /5A(current ratio)
Connection mode: three-phase three-wire
Power supply: AC220V or AC/DC80-265V
Other: (In accordance with the default factory settings if not stated)
Dimensions:
Connection DIagram of three-phase three-wire & three-phase four-wire:
Certificate of product:
Our main products
About our company