24v car booster jump starter
Battery: | Li-polymer Battery | Charge Mode: | CC/CV 12V 2A |
Dimension: | L190*W90*H150mm | Starting Current: | > 400A |
Normal Capacity: | 85.5WH 3.7V*3300mAh*7 | Peak Current: | 800A (<3s) |
Output Voltage: | Car boot port 12V/24 V | Fully Charge Time: | About 5 hours |
| USB port 5V 2.1A; | Cycle Life: | Above 1500 times |
| 19V 3.5A | Operating Temperature: | -20℃-60℃ |
3 Functions:
1. Support 12V/24V car emergency starting
2. Support mobile charging for various brands digital products like Mobile phone, PDA, tablet PC, MP3/MP4
3. Support mobile charging for various brands laptops
4. Multi-mode LED lighting (general lighting, SOS distress signal, bright flash lighting)
and LED pad warning light
9 Features:
1.7*3300mAh 25.9V high-capacity Li-polymer power station with 400A(peak) MINI truck rechargeable
Jump Starter
2.Support 12V/24V engine emergency starting
3.Built power bank function, USB 2.0 output
4.LCD display allows for easy battery status and output voltage monitoring
5.Built-in 3W LED light provides illumination in emergency situations on the road
6.Flashing red & white light warning function
7.DC 19V Output ,charging for notebook etc
8.Overload and over-temperature and short-circuit protection
9.Reverse polarity protection
Host: | 1pcs |
Battery clip: | 1pcs |
Adapter charger: | 1pcs |
Car charger: | 1pcs |
USB connectors: | 1pcs |
Instruction book: | 1pcs |
Warranty Card: | 1pcs |
1.How to Use the Product to Start an Auto
When 24 V battery of a truck is in insufficient voltage or low temperature status and the truck cannot be started, the product can be used to start the truck.
Using Method: Insert the randomly distributed starting output line into the EC5 interface of the product (positive pole is red and negative pole is black). Clamp the red alligator clip, which is the positive pole of output line, on the positive pole of 24V battery, and black alligator clip, which is the negative pole of output line, on the negative pole of truck battery. If the connection is correct, LCD display of the product will display a sign meaning the battery of the product is connected with the battery of the truck and everything is ready. Furthermore, the built-in buzzer will alarm twice with long buzzing. Then two continuous short "beep" sounds are alarmed every two seconds to inform user the start status is ready and please start the truck right away. If the connection is reverse or the contact is unreliable, it may result in the product cannot be started automatically.
After the connection is connected properly, you can start the truck within 60s. If the truck is not started beyond 60s, the equipment is switched off automatically. It requires you to disconnect the product with the connector of auto battery and connect again. Thus, the system will re-start ignition function and maintain for 60s. After the truck is started, please release the alligator clip connected with the truck battery, and draw the start connection line from the rear socket of the product.
2.How to Use LED Warning Sign Function
Main usage of LED warning sign is to warn the following vehicles not to collide with the accident vehicle when the truck has failure. It can also be used as a lighting device when repairing the truck.
Open the warning sign and long press LED warning sign switch key (for about 3 s) The LED is started.
The default mode is to enter into “traffic fault warning” mode when being started. After being started, short press the key and take switching among “traffic fault warning”, “White lighting” and “Off” modes. Under working status of warning sign, long press the key (for about 3s), and the LED warning sign function can be switched off.
3.How to Charge the Product
Charging on Vehicle: Insert the vehicle charger head of DC adapter, which is distributed randomly with the equipment, in the vehicle cigar lighter. Connect the DC head into DC input port of the product. A scroll bar can be viewed on LCD display, i.e. the product is being charged. After the charging is completed, the scroll bar stops scrolling and display the electricity quantity is full.
Charging at Home: Select 12V 2A adapter to connect with the main supply socket. Then connect the DC output end into the DC socket of the product. A scroll bar can be viewed on LCD display, i.e. the product is being charged. After the charging is completed, the scroll bar stops scrolling and display the electricity quantity is full.
Established in August 2011, Shenzhen Repower Technology Co., Ltd. is an integrated high-tech enterprise, specialized in R&D, Production and Marketing of Emergency Power Supply, like Car Jump Starter / Household Emergency Power Station/ Power Bank. Now Repower’s own brand and OEM/ODM brand car jump starter are well sold in overseas market.
Repower-Tech, relying on Group 40, 000 square meters of its own production line, worldwide branches, and the wealth of research experience, professional and technical skills, strong marketing team, provide high quality products and services to global customers efficiently and effectively.
Repower-tech transplant advanced international management and technology, set up their own sound system and laboratory research, and adopted the ISO9001: 2000, ISO14001, ISO / TS 16949, UL, CSA, CCC, T-MARK, BSI, CE, FCC, RoHS series domestic and international quality assurance and product safety certification.
"Repowers" adhering to the "innovation, technology, fashion, environmental protection" Idea, and the concept of "quality first, customer first" work ethic, create easier & more energy-efficient products.
“Repower—Technology serves your life !”