Specifications
High perfomance pneumatic torque screwdriver1.Direct plug-in type
2.High accuracy
3.Large torque range
High perfomance 220V-240V pneumatic torque screwdriver
Features of the pneumatic torque screwdriver:
1, Drag cup DC brushless of the pneumatic torque screwdriver is made up of stator, rotor set, End cover, hall sensor.
2 Prominent characteristics of the pneumatic torque screwdriver is the structure of the stator group. The stator group is made up of enclosure, stator punching, winding cup.
3, Enclosure of the pneumatic torque screwdriver: adopt stainless steel, rusty, no magnetic conduction, high strength
4, Stator punching of the pneumatic torque screwdriver: adopt annular silicon sheet, without gaps do not produce the cogging torque
5, Winding cup of the pneumatic torque screwdriver: enamelled wire is cylindrical shape, enameled wire slot with higher rate
6.The highest speed 900rpm design and offer two years warranty for free repair service.
7. the pneumatic torque screwdriver is ues the high efficiency brushiess motor gives unsurpassed durability.
8. the pneumatic torque screwdriver is adopt the carbon brushless motor that it will reduce the business cost effectively.
9. the pneumatic torque screwdriver is brushless motor design that is available in the clean room operation.
10. the pneumatic torque screwdriver is adopt excellent gold plating switch that it can raise the contact spot life up to
11. the pneumatic torque screwdriver is 10 million times and reduce the maintenance cost.
12. the pneumatic torque screwdriver is no any carbon perticle flow out not only responses to the earth environment
13. the pneumatic torque screwdriver is protection but also reduces air pollution.
Details of the pneumatic torque screwdriver:
Specifications of the pneumatic torque screwdriver:
| Model | Voltage | Torque range(kgf.cm) | No load speed(rpm) ± 10% | Torque accuracy(kgf.cm) | Screw(mm) | Bit size(mm) | Size | Weight(kg) |
| SJ-600 | 200-240V | 2-35 | 900 | ± 0.3% | 1.6-6 | SS1/4 | Φ 42*220 | 0.51 |
Applications of the pneumatic torque screwdriver:
1.pneumatic torque screwdriver is automatic pneumatic torque screwdriver. When the torque is locked, the clutch will automatically trip, the motor power will be auomatically off and the pneumatic torque screwdriver will stop running.
2. pneumatic torque screwdriver is Brushless aerospace-graded motor is used and produces no dust,low noise and durability. Maintenance is not necessary.
3. The forward/ reverse switch of pneumatic torque screwdriver is designed according to ergonomics allowing the one-handed opreation.
4. Torque adjustment of pneumatic torque screwdriver is easy and convenient step-less adjustment by rotating the torque adjustmnet right to the left or to the right. Speed can also be adjusted to High(Hi) or Low(L0).
5. pneumatic torque screwdriver is for four screwdriver heads( A,B,C, and D) are available.
Advantages of the pneumatic torque screwdriver:
1, the pneumatic torque screwdriver is non-carton brush: do not produce carbon powder, no pollution, used by clean workshop
2, the pneumatic torque screwdriver is long life: no need to change the carbon brush, life is only limited by bearing life
3, the pneumatic torque screwdriver is efficiency: brushless motors with high efficiency, long time not too hot
4, the pneumatic torque screwdriver is low noise, no carbon brush friction, low noise
5, the pneumatic torque screwdriver is no interference: when using not interference to power and other electronic products
6, the pneumatic torque screwdriver is simple and excellent clutch performance: the electronic control precision and realize on-off to stop using force and the small, long time holds no fatigue
Main points of the pneumatic torque screwdriver:
1.Direct plug-in(AC220V)type,high accuracy,large torque range.Inside double insulation,automatically reset fuse and indicator light conform ISO standard.
2.Designin ergonomics handle and anti-slip ensures operator comfort.
3.Transmission is the part which obtained national level patent and has longer life cycle.
4.Ensure accuracy in fastening with precision designed automatic shut-of clutch .
5.Plus the overload protect design,it can ensure each screw can be quickly and well luck one time.All these features are what we want to provide to our customers.
pneumatic torque screwdriver of our company:
The main products of our company:
Air tool,soldering pot,pneumatic torque screwdriver,plastic tool box ,soldering station,dispensing machine,hot melt glue gun,hot air gun, soldering pump,soldering iron,tool parts,hot fix applicators and so on.
Dongguan Century Hardware Tools, your BEST choice!
Dongguan Century Hardware Tools S&T Co.Ltd,a subsidiary enterprise of Taiwan Century Technology Enterprise (Holding) Co., Ltd, which is a new enterprise integrating the R&D, manufacture, sales and foreign trade of hardware,tool box and electronic tools.
We are a professional company of pneumatic torque screwdriver which is a large scale manufacturer integrated with development,production,trade and service.Our factory specialized in high quality pneumatic torque screwdriver, air tool,soldering pot,pneumatic torque screwdriverand so on.
Our factory of pneumatic torque screwdriver have a wide range,good quality, reasonable prices and stylish designs,our products of electric screwdrivers are widely recognized and trusted by users.
Any questions about pneumatic torque screwdriver,please send emails to us or talk on Trademanager!
Our company warmly welcomes clients from at home and abroad to visit us for business negotiation, and we are seeking provincial, municipal and regional distributors in Mainland China. Our modes of operation include Brand Agency and Direct Factory Sales. Hope that the people with the same ideals could join us to create a brilliant future.