Product Introduction
ZDY hydraulic tunnel drilling rig are mainly used for drilling holes for water exploring and injection, gas exploring and discharging, geological exploring, bolting on slope and other drilling works. It is available of all direction position (±90°) for in underground coal mines. Adopting entire hydraulic system.
Main Characteristics
1.This drill adopts hydraulic drive mechanism, has great capacity of drilling, high speed, simple operation, stable and reliable work.
2.It consists of main frame, pump station and operational panel. With the split type structure in the main frame, it is easy to disassemble and transportation.
3.It points column frame and mount two drill stand form, can choose according to level of the coal mine roadway and the use of different drilling.
4.In the rig is equipped with a high pressure water generator and selects the high pressure sealing pipe for low permeability coal seam can be slotted, so as to improve the efficiency of gas drainage and shorten the extraction time.
Technical Parameters
PARAMETERZDY-660
DRILL DEPTH(m)150/100
DRILL HOLE DIA.(mm)φ75~φ110
DRILL SHAFT DIA(mm)φ42/φ50
DRILL BIT WITHOUT COREΦ75~Φ110
CORE DRILL BITΦ55~Φ75
DRILLING ANGLE±90°
IDLE SPEED(r/min)0~150/0~300
RATED TORQUE(Nm)660
RATED ROTAE SPEED(r/min)140/270
FEEDING STROKE(mm)650
FEEDING CAPACITY(kN)29
LIFTING CAPACITY(kN)42
RATED PRESSURE(MPa)16
MOTOR POWER(kW)15
DOMENSION(mm)1800×620×1300
WEIGHT(kg)430
PUMP WEIGHT(kg)328
CONTROL BOARD WEIGHT(kg)50
DRILL MACHINE WEIGHT(kg)900
