Specifications
Controller: intelligent bruhslessRim Aluminum dual wall
Front brake TEKTRO Disc-Brake
| Electric bike DW801 | |||||
| Electric System | Mechnical System | ||||
| 1 | Motor | Aluminum Brand brushless | 1 | Frame | 26" Aluminumfolding suspension |
| 180W - 350W geared hub motor | 2 | Tyres | 26"*2.10" KENDA brand. | ||
| 2 | Battery | 36V /10AH Lithium battery | 3 | Rim | Aluminum dual wall |
| 3 | PAS | 1:1 pedal assistant system | 4 | Front fork | SR SUNTOUR suspension fork |
| 4 | Controller | intelligent bruhsless. | 5 | Front brake | TEKTRO Disc-Brake |
| 5 | Charger | AC 110V -240V 2amps | 6 | Rear brake | TEKTRO Disc-Brake |
| 6 | Charge time | 4-6hours | 7 | Speed gears | SRAM 8S cassette Sprockets |
| 7 | Display | LCD DISPLAY | 8 | Rear derailleur | SRAM X7 9Speed |
| Performance | 9 | Handlebar | Aluminum | ||
| 1 | Max speed | 25km/h for Europe | 10 | Stem | Aluminum |
| 2 | Range | 45km with PAS | 11 | Brake lever | Aluminum with power off switch |
| 3 | Max load | 100kgs | 12 | Chain | Rust resistant chain |
| 4 | N.W. | 28kgs(with36V /10AH battery ) | 13 | Chain wheel | Aluminum crank. |
| Loading Qty | 14 | Front light | LED white | ||
| 1 | 20′GP | 108 pcs | 15 | Saddle | Velo |
| 2 | 40′HP | 267 pcs | |||
Warranty:
All of our products are guaranteed and backed by our technical assistance and considerate service. Furthermore, we usually send you a certain percentage of spare parts free of charge based on 40HQ container order, and the value should be equal to 2% of the total payment. During the guaranteed period, any of the parts could be replaced upon receipt of your photos for proof. We can also offer training service for your staff at our factory if needed.
1. The frame: 2years
2. Front fork: 24 months
3. Gears, bearings: 24 months
4. Handle bar,stem, brakes (excluding brake shoes and pads): 12 months
5. Battery,charger,motor: 12 months
6. Paintwork (excluding deliberate or accidental damage): 12 months
7. wheel rims, rear rack and kickstand: 612months
The warranty is only valid within the country the bicycle was purchased.Whereas,it is not valid for normal wear, misuse orneglect,improperly operation, damage or failure due to accident,parts or accessories not originally intended or compatible, modification of the frame, fork or other main components.
Quality control:
1. Our products are targeted for the overseas demanding market,and we have a strong sense of responsibility for the quality,we consider quality as our life.
2. We choose good suppliers to work together; the main fittings are mostly from Japan, Taiwan and other top suppliers
3. We carry on periodic training to our staffs, in order to enhance their consciousness of quality.
4. All the components should be checked carefully before assembling, thus,we can make sure that the broken or deficient components will not be fixed to the bikes.
5. Each E-bike will be strictly inspected before packing and shipping out.,to insure that they could be satisfied with you.
6. We always try to improve the quality of our products, meanwhile we pay much attention to our customer service, we will provide a certain amount of free spare parts to you when you place a quantity order, Quality problems will be solved at the first tim
Changzhou Daywins E-Bike Manufacturing Co., Ltd. is a professional manufacturer of electric bikes, electric scooters and electric motorbikes. Since 2002, our products have got various certifications, such as SGS, CE, EEC, EN15194, ISO9001:2000, etc.
In the past 10 years, our products have been exported to the UK, Italy, Austria, Germany, France, the USA, Southeast Asia and so on. Since the foundation, we have taken quality and service as our keys.
Our company is located near to Shanghai, enabling us to transport goods to Shanghai Port with lower cost than others. Thanks to the advanced equipment and increasingly matured techniques we have, we can produce more than 150,000 pieces of electric bikes and e-scooters with authentic quality every year. We believe, with our joint efforts, we will make your business more successful.