Brief introduction:
Pneumatic transmission control experimental device is designed and made based on the universal content about “Hydraulic and Pneumatic transmission”, “Pneumatic control technology”. It can be used as the comprehensive test-bench of the mechanical, electrical and pneumatic. Students can get more accurate understanding of the structure of pneumatic components, pneumatic control loop theory and design methods through operation.
Main technical parameters:
- 1. Size: 1500mm*700mm*1720mm;
- 2. Power: input AC220V, output DC24V/2A, power of air compressor: 360W, power: AC220V, capacity: 10L, Rated output pressure: 0.7MPa
Features:
- 1. The pin and base of the product is national patent. The components won’t loose or fall off when doing experiments. The bench attachments bottom adapts the 2MM thickness aluminum with CNC punch press molding.
- 2. Experimental device consists of training tables and training units, pneumatic and electrical control devices and other components.
- 3. Equipped with pneumatic components, and are equipped with transition plate for easy and optionally placing the components in the experimental panel, circuit lap using quick-change connectors to facilitate convenient and quick disconnect.
- 4. Air pressure is low, electrical control uses low voltage 24V DC; training pneumatic control circuit safe and reliable, with manual, automatic, sequential and other functions.
- 5. Training control unit can also use independent relay control unit to control electrical, superiority and advancement of PLC programmable can be understood by comparison and then deepen and grasp the understanding of PLC programmer.
Basic experimental Pneumatic circuit
- 1. single-acting cylinder commutation circuit
- 2. double-acting cylinder commutation circuit
- 3. single-acting cylinder speed control loop
- 4. double-acting cylinder-way flow control loop
- 5. double-acting cylinder bi-speed circuit
- 6. the speed loop for access
- 7. buffer circuit
- 8. the secondary pressure control loop
- 9. high and low pressure conversion circuit
- 10. counting circuit
- 11. the delay circuit
- 12. overload protection circuit
- 13. interlock circuit
- 14. single-cylinder reciprocating control circuit
- 15. single-cylinder reciprocating continuous circuit
- 16. linear cylinders, rotary cylinders loop sequence of actions
- 17. multi-cylinder sequence of actions loop
- 18. twin synchronized action circuit
- 19. four-cylinder linkage circuit
- 20. the unloading circuit
- 21. gate type shuttle valve applications circuit
- 22. quick exhaust valve application circuit
- 23. loaded latch circuit
Configuration:
No | Item | Spec | QTY |
1 | Air compressor | XY5.2 dual connector | 1 piece |
2 | Experimental table |
| 1 piece |
3 | Components fixed stand |
| 1 piece |
4 | DC switching power supply unit(DC24V) |
|
1 set |
Signal input unit | |||
Relay control unit | |||
5 | Single-acting cylinder | QGX25×100 | 1 piece |
6 | Dual-acting cylinder | GGX25×100 | 2 pieces |
7 | Triple pieces | AC2000 Triple pieces | 1 piece |
8 | Pressure reducing valve(with pressure gauge) | AR2000 | 1 piece |
9 | Manual valve | 4H210-08 | 1 piece |
10 | Single solenoid valve(two five-way) | 4V210-08(DC24V) | 2 pieces |
11 | Dual solenoid valve(two five-way) | 4V210-08(DC24V) | 1 piece |
12 | Single solenoid valve(three five-way) | 4V210-08(DC24V) | 1 piece |
13 | Single gas valve (two- pass) | 4A210-08 | 2 pieces |
14 | Dual gas valve (two-pass) | 4A210-08 | 2 pieces |
15 | Rotary valve(machine control) | MOV-2 | 1 piece |
16 | Rotary valve(button) | MOV-3A | 1 piece |
17 | Door type shuttle valve | ST-02 | 2 pieces |
18 | Quick exhaust valve 1/4 | QE-02 | 2 pieces |
19 | One-way throttle valve | RE-02 | 2 pieces |
20 | One-way throttle valve | JSC601 | 7 pieces |
21 | Way valve | 1/4 | 2 pieces |
22 | Sequence valve | Designed and made | 2 pieces |
23 | Gas volume | Designed and made | 1 piece |
24 | Six-way | Designed and made | 2 pieces |
25 | Limit switch | Designed and made | 4 pieces |
26 | Experimental manual |
| 1 piece |
27 | Allen wrench |
| 2 pieces |
28 | screwdriver |
| 2 pieces |
29 | Wrench | 150*19 | 1 piece |
30 | Pliers |
| 1 piece |
31 | Scissors |
| 1 piece |
32 | Muffler(small) | 1/8 | 2 pieces |
33 | Muffler(big) | 3/8 | 1 piece |
34 | Tee (T-Tee) | Φ6 | 4 pieces |
35 | Tee(Y-type reducing tee) | Φ8-Φ6 | 1 piece |
36 | Four way | Φ6 | 2 pieces |
37 | L-type (threaded two-pass) | 601 | 2 pieces |
38 | L-type (threaded two-pass) | 602 | 2 pieces |
39 | Vent plugs | Φ6 | 25 pieces |
40 | Fuse | 2.5A | 5 pieces |
41 | Button switch |
| 3 pieces |
42 | Windpipe | PU Windpipe 6*4 | 1 roll |
Specializing in the development and manufacturing of professional automotive teaching equipment, air conditioning and refrigeration teaching equipment, electrical and electronic teaching equipment and lift teaching and other training equipment.
About us
A preferred and trusted, one-stop source for educational equipment. A leading scientific partner for schools, universities, science laboratories and research institutions. We are located in Baiyun District, Guangzhou and adjacent to Guangzhou Baiyun International Airport.
Our Mission
It is to offer a reliable, high-quality product and to provide outstanding service.
Our Main Market
Mid East, Eastern Europe, Africa, Western Europe, domestic Market.
