PLC Control Pneumatic Training Equipment(XK-QD2)/Pneumatic Trainer for Education
(Pneumatic training equipment/pneumatic trainer/Educational training equipment)
1.1 Experimental platform adopts two kinds of control mode: group of relay control and PLC control. It is equipped with common pneumatic components, suitable for teaching practice of machinery,mechanical and electrical integration.
1.2 Operation area is aluminum panel, square pipe frame is provided with casters. On the right side is the control module of the platform, including the leakage protection function. PLC control module, host computer communication port, a relay control module, switch module. Below the desktop with cabinet, used for the storage of components
2.1 Size: 1500 mm x 750 mm x 1800 mm; 120KG
2.2 The power supply: three-phase AC380V, power < 500 VA.
2.3 The power module:
1) Three-phase and four phase system, AC380V, 50Hz
2) Three-phase power switch with leakage protection
3) Equipped with emergency stop button and Main power,power supply indicator lamp
4) Provides power supply output of DC24V
2.4 Gas source: by silent air pump
2.5 Tool accessories
2.7 Annex: Experimental jump line, commonly used tools, software disc
2.8 Manual
1. PLC hardware and software
1) PLC hardware knowledge
2) Wiring training PLC
3) PLC internal resources for learning
4) Using of PLC programming software
5) Download,upload and online monitoring of PLC applications
2. Pneumatic basic loop training
1)Single-acting cylinder reversing loop
2)Double-acting cylinder reversing loop
3)Single-acting cylinder speed control loop
4)Double-acting cylinder on-way speed regulation loop
5)Double-acting cylinder both way speed regulation loop
6)Speed changing-over loop
7)Buffering loop
8)Twice pressure control loop
9)Counting loop
10)Delay loop
11)Overload protection loop
12)Interlocking loop
13)Single cylinder single reciprocating control loop
14)Single cylinder continuous reciprocating action loop
15)Double-cylinder sequential action loop
16)Double-cylinder synchronization action loop
17)Unloading loop
18)Joint gate type shuttle valve application loop
19)Rapid escape valve application loop
3.Configuration list
No. | Name | Model and Explanation | Unit | Qty |
1 | Experiment Bench Main Structure | PLC control pneumatic experiment bench ( Components install type: T type groove) | set | 1 |
2 | Air compressor | Air pump input voltage: AC 220V/50Hz;Motor power: 0.55KW;Rated output voltage: about 0.8Mpa;air pump volume: about 10L;working noise:<55 decibel | set | 1 |
3 | Pneumatic component | Double solenoid directional valve (5/2 way)(4V220-08-DC24V)) | pcs | 2 |
Double pneumatic operated directional valve(5/3 way)(4A230-08) | pcs | 2 | ||
Single pneumatic directional valve(two-position three way)(3A210-08) | pcs | 2 | ||
Stroke valve(two-position three way)(button)(JM-322) | pcs | 2 | ||
quick exhaust valve (QE-02) | pcs | 1 | ||
quick couplingM14 | pcs | 50 | ||
Two-Position Five-Way Single control solenoid directional control valve(4V210-08-DC24) | pcs | 1 | ||
two-position five way hand-operated direction valve(4H210-08) | Pcs | 2 | ||
two-position five way Single pneumatic directional valve(4A210-08) | Pcs | 1 | ||
one-way throttle valve(ASC-08) | Pcs | 2 | ||
Filter regulator lubricator combination(AC2000) | Pcs | 1 | ||
Or gate type shuttle valve (ST-01) | Pcs | 1 | ||
reducing valve (AR2000) | Pcs | 2 | ||
single-acting cylinder(MSA-20 x 75-S) | Pcs | 2 | ||
double-acting cylinder (MA-20 x 100 -S) | Pcs | 2 | ||
Two position three way electromagnetic directional valve 3V310-08-NC-B | Pcs | 2 | ||
Magnet switch AL-03F | pcs | 4 | ||
4 | Experiment wire | KT4ABD51-200mm | Pcs | 10 |
KT4ABD51-400mm | Pcs | 10 | ||
KT4ABD51-800mm | Pcs | 10 | ||
5 | Manual book |
|
| 1 |
6 | Pneumatic accessories | Three Direct Links(T type three way) | Pcs | 8 |
belt | Pcs | 5 | ||
Four way | Pcs | 4 | ||
Air plug | Pcs | 10 | ||
Air pipe | M | 50 | ||
7 | Tools | Small tool box | Pcs | 1 |
nipper pliers | Pcs | 1 | ||
scissors | Pcs | 1 | ||
internal hexagonal wrench | Set | 1 | ||
8 |
| PLC programming software and program | Set | 1 |
9 | Control Panel | Include time relay, power, circuit protection system etc. | Set | 1 |
Ms. Sally Zhao
Skype: xksally
Tel: +86-531-88771298
Shandong Xingke Intelligent Technology Co., Ltd.
ADD:4th Floor, No. 786 Xinluo Street, Gaoxin Zone,Jinan,Shandong,China.
Post code: 250101
Website: :810/
http://sdxk.en.china.cn/