Heatless Desiccant Air Dryer
Inlet Air Temperature: ≤40℃ or 104 ℉
Operating Temperature: ≤40℃ or 104 ℉
Freezing Medium (Refrigerant): Aluminium Oxide, Molecular Sieve
Pressure Dew Point: -20 ~ -40℃ or -68 ~ -104 ℉
Offer IS Standard Air Quality
Type: Heatless Adsorption/Desiccant
Time Proven Design:
*Rust Prevention: have been treated against corrosion, it does not need to be treated against corrosion and dust again within 10 years on the promise that normal maintenance is ensured.
*Various Valves provides reliable and long service life.
*Vessels have a large filling level of desiccant bed that allows compressed air has enough time to contact with desiccant. That is, more efficient on drying process in the Adsorption Dryer.
*Generously sized silencers ensure efficient noise reduction for the escaping regeneration air.
Ease of Monitoring:
*PLC Control Panel
*Electronic(Automatic)Drain Valve.
Safety Protection Systems for overheat and Systems Alarm and Stop for Errors and Overworking. Expand Machine Life.
*Each valve is controlled individually with a time-delay, which results in overlap-free switch-over without pressure peaks between adsorption and regeneration.
The main components of Desiccant Air Dryer are the two pressure vessels(Tower A & Tower B). They are both filled with desiccant and are alternately operated via switch-over. For a drying cycle, the compressed air to be dried flows through one of the vessel where the moisture is thoroughly removed by the desiccant(adsorption process). Before the moisture is purging into the atmosphere through muffler, the moisture is stored in the desiccant in the second vessel will be removed by regeneration process.Once the desiccant in the vessel in which drying process takes place is saturated with moisture, the adsorption and regeneration functions of both vessels will be switched, that is, the drying process begin again.
We called one complete run of adsorption and regeneration in a vessel as a cycle, and the process time required to use is called cycle time. Generally, a cycle time is about 10 mins, 5 mins regeneration and 5 mins adsorption.
We called one complete run of adsorption and regeneration in a vessel as a cycle, and the process time required to use is called cycle time. Generally, a cycle time is about 10 mins, 5 mins regeneration and 5 mins adsorption.
Model | Capacity (Nm^3/Min) | Air Entrance Diameter | Unit Size (mm) (L*W*H) | Power | Weight (Kg) |
HR-10RD | 1 | G0.75'' | 600x300x1300 | 220V/50HZ | 85 |
HR-15RD | 1.5 | G0.75'' | 700x300x1350 | 220V/50HZ | 110 |
HR-25RD | 2.5 | G1'' | 800x350x1480 | 220V/50HZ | 170 |
HR-38RD | 3.8 | G1'' | 900x350x1580 | 220V/50HZ | 220 |
HR-55RD | 5.5 | G1'' | 950x350x1650 | 220V/50HZ | 260 |
HR-69RD | 6.9 | G1.5'' | 1000x400x1850 | 220V/50HZ | 370 |
HR-110RD | 11 | G1.5'' | 1100x450x2100 | 220V/50HZ | 480 |
HR-150RD | 15 | G2'' | 1200x500x2200 | 220V/50HZ | 650 |
HR-180RD | 18 | G2'' | 1300x550x2200 | 220V/50HZ | 700 |
HR-220RD | 21.5 | DN65 | 1400x600x2300 | 220V/50HZ | 850 |
HR-250RD | 25 | DN65 | 1500x650x2300 | 220V/50HZ | 930 |
HR-290RD | 28.5 | DN80 | 1600x650x2400 | 220V/50HZ | 1050 |
HR-350RD | 35 | DN80 | 1650x700x2500 | 220V/50HZ | 1200 |
HR-450RD | 45 | DN100 | 1750x750x2600 | 220V/50HZ | 1500 |
HR-550RD | 55 | DN100 | 1850x800x2800 | 220V/50HZ | 1700 |
HR-650RD | 65 | DN100 | 1900x850x2850 | 220V/50HZ | 1950 |
HR-750RD | 75 | DN125 | 2100x900x3000 | 220V/50HZ | 2800 |
HR-850RD | 85 | DN125 | 2200x1000x3100 | 220V/50HZ | 3300 |
HR-1000RD | 100 | DN150 | 2500x1150x3200 | 220V/50HZ | 3600 |
HR-1400RD | 140 | DN150 | 3010x1710x3130 | 220V/50HZ | 4980 |
HR-1600RD | 160 | DN200 | 3510x1810x3350 | 220V/50HZ | 6250 |
HR-1900RD | 190 | DN200 | 3510x1810x3350 | 220V/50HZ | 6460 |
HR-2100RD | 210 | DN200 | 3710x2010x3680 | 220V/50HZ | 7280 |
HR-2400RD | 240 | DN200 | 3710x2010x3780 | 220V/50HZ | 8520 |
HR-2600RD | 260 | DN200 | 3910x2210x3890 | 220V/50HZ | 9360 |
Water-Cooling Refrigerated Air Dryer for Compressed Air
Air-Cooling Refrigerated Air Dryer for Compressed Air
Heatless-Desiccant Air Dryer for Compressed Air
About us
1, Hiross is Professional on the business of Air Dryer for Compressed Air for more than ten years.
Equipment & technology
2, Focus on high quality as well as innovation of energy saving technology on air dryers.
Service
3, Stable product quality , supply, the good faith management. Customized as your needs.