Good price hot air type biomass sawdust dryer for sale, wood drying kiln

Introduction of wooden sawdust dryer 

Biomass Dryer is professionally designed for drying different kinds of wood sawdust. It has advantages of low cost, low consumption, high capacity, easy operation and maintenance, etc. In addition, the round places of pipes can be changed to any angle which can save space and solve plant dimension limitation.The fuel boiler generates hot air which mixes with wet materials and then is sucked into the pipes by the exhaust blower (fan) quickly.And then hot air is flowing and going though the curving pipes and buffer (drying chamber) of drier, thus wet materials is finished to dry, and the dried materials are expelled out by the exhaust blower (fan).

Working principle of wooden sawdust dryer

Hot air enters into stirring and drying chamber from the bottom of dryer with suitable atomizing speed. It exerts strong shearing, blowing, floating and rotating effect to raw material.Therefore raw material is granulated through centrifugating, shearing, impacting and friction effect. It strengthens the process of heat exchange. At the bottom of dryer, the large and damp granule is crushed under the action of stirrer and the granule that is small in particle and contain less moisture will lift accompanied with revolving air stream. During the period of lift, it is dried further. Because gas and solid two phases flow in heat exchange, so the machine has strong drying capacity.

Raw meterial of wooden sawdust dryer 

Biomass Drye is suitable for starch, rice flour, food, chemical, medical industry and other fields for drying powder and thermal sensitivity materials.
raw materials: rice husk, saw dust, wood dust, wood shavings, wood chips, branches, etc. with the diameter less than 3mm and length less than 5mm. The temperature of drying machine ranges from 180°C-250°C.

The structure of wooden sawdust dryer 

1. Fireplace is the place where the firewood, coal, gas or other material is burning for heat, there is a specially designed buffer which can make the hot air through but provent the fire in.
2. Inlet place is beside the fireplace, thus the material can be dry at a early time.
3.Roller is running evenly to make the material drying and processing at the same time.
4. Discharging unit is installed with thermeter to control drying temperature. The temperature change of dryer's feeding end can be indicated by the thermometer to control the inner drier temperature ( generally 250-350°C)
5.The cyclone is for the discharging, which is more convenient and air lock for making the discharging little noise and no waste.

Basic feature of wooden sawdust dryer 

1.Feed costs and reduce environmental pollution

2.Direct heating, drying quickly, folding installation, save a space

3,the production efficiency: hot air for 180 ℃,the hot air temperature not below 180 ℃, can be up to 300 ℃.

4,fuel can choose: wood (broken wood), coal, steam or electrical heating.

Technology parameters of sawdust dryer 

Model	Power	Capacity	Drying the material moisture content before drying	Weight	The area of land occupied by
HJ-4	4kw	300-400 kg/h	35%	1000kg	8*1.5*3.5m
HJ-6	4kw	400-600 kg/h	40%	1500kg	10*1.5*3.5m
HJ-8	11+0.75+1.5kw	600-800 kg/h	50%	2800kg	12*2.5*3.5m

The whole line of making wood briquette charcoal

1.Crush the raw material into small pieces (diameter is about 3-5mm).

2.Dry the material by machine or dried it in the sun , till the moisture is less than 12%.

3.Put the material into feed let of briquette machine.

4.Produce the briquette stick from biomass material without any additive.

5.Carbonized the briquette stick.

The machines are packing in the plywood boxes, then put into the 20 feet or 40 feet container in delivery.

Gongyi Xiaoyi Mingyang Machinery Plant is one of the largest and earliest manufacturers of the biomass energy equipment ( biomass briquette machine line, charcoal making production line, wood pellet production line and the related machinery).
* one of the largest and earliest manufacturers of the charcoal making machine, biomass briquette machine and wood pellet production line in China with 30 years experience.
* Covered an area of 12000 square meters, currently has more than 120 employees, divided to 7 department.
* Designed and produced 6 production line, more than 150 kinds of machines, awarded 10 patents in China.
* Products are widely accepted in both domestic and world market ,more than 150 countries.
* The company enlarged for building one experimental Center of high-tech automtaic production equipment to meet the market requirement.
* Professional after-sales service team to be able to handle client issues in a timely manner.
* high level standard workshop, advanced producing equipment, Experienced technicians, fine workmanship with 30 year working experience.
* stock for based goods, accessories in stock to meet you need,stocked your samples and all the details of the goods of the next order.
* strict inspection personnel and process, and we are strictly ensure the quality of the international standard.
* We have the test center of the machine, Each machine will running before delivery.
* recommend clients for free, offer the layout drawing and the profit table and install video and free stuff training.

We have the professional and experienced team to assist you;  If there is any questions, please feel free to contact me, I am always here online waiting for your calling, also click the name card to get more information;