Hot selling Zhengke brand 2.0m*20m DDGS drying equipment in Zhengzhou
1. Application of DDGS drying equipment
DDGS drying eqiupment is a set of equipment to process mass materials. Due to reliable performance, wide adaptability range, low consumption, high handling capacity, DDGS drying eqiupment is widely used for sawdust, wood chips, wood shaving, forage, animal manure, etc. DDGS drying eqiupment is generally applicable for granular materials of high moisture. DDGS drying eqiupment has the advantages of high capacity, wide application range, small flow resistance, convenient operation.
2. Structure of DDGS drying equipment
DDGS drying eqiupment is mainly composed of cylinder, front ring, back ring, gear, supporting roller, dragging roller, discharging device, lifting board, reducer, motor, hot air channel, loading chute, furnace. We can also design coal gas producer, combustion chamber, bucket elevator, belt conveyer, constant feeder, cyclone dust catcher, draft fan.
3. Principle of DDGS drying equipment
Wet materials are sent into hopper by belt conveyor or bucket elevator, then to the drum by feeder. The gradient of loading chute must be bigger than the cylinder to make the materials move smoothly. The cylinder is installed at an angle of about 3-5.Materials move from upper end to lower end, while heating medium moves from the opposite direction or the same. During this process, moisture inside the materials gets vaporized. The waste gas is released by the draft fan at the end of the drum. Some lifting boards are fixed on the inner wall of the cylinder. They elevate and scatter the materials repeatedly to accelerate the efficiency of drying. At last, the hot air is released into atmosphere through dust catcher.
4. Components of DDGS drying equipment
All the equipments consist of feeding system, heating system, transmission system, driving system, dust catching system, discharging system, electricity control system.
5. Parameter of DDGS drying equipment
Type | Diameter(m) | Length(m) | Power(kw) | Speed(r/min) | Dimension(m) | Capacity(t/h) |
KHZD | 1.0 | 8 | 5.5 | 3-6 | 8*1.9*2.1 | 0.5-2 |
KHZD | 1.2 | 10 | 7.5 | 10*1.9*2.1 | 3-5 | |
KHZD | 1.5 | 12 | 15 | 12*2.6*2.8 | 5-8 | |
KHZD | 1.8 | 18 | 22 | 18*3.0*3.0 | 8-15 | |
KHZD | 2.0 | 20 | 37 | 18*3.2*3.2 | 20-22 | |
KHZD | 2.2 | 18 | 37 | 18*3.6*3.6 | 20-24 | |
KHZD | 2.4 | 18 | 45 | 18*3.8*4.0 | 24-26 | |
KHZD | 2.8 | 18 | 75 | 18*4.0*4.2 | 25-28 | |
KHZD | 3.0 | 20 | 110 | 20*5.0*5.0 | 30-35 | |
KHZD | 3.2 | 20 | 132 | 20*8.0*7.0 | 35-40 |
