Product Description:
This machine is suitable for the removal of water after sterilization of soft-packaged products such as high and low temperature meat products and vegetable products, and it is also suitable for the removal of surface water after vegetable cleaning. By repeatedly turning over and draining, and blowing with high pressure and strong cold wind from the upper part, the soft packaging can completely achieve the effect of drying the surface water droplets (the water stored in the wrinkles of the bag surface can also be dried). This equipment is connected with the sterilization machine and its speed is synchronized. The power of each fan is 0.75KW, which is environmentally friendly and energy-saving.
Features:
It effectively removes water droplets on the surface of the material, greatly shortens the working time of labeling and packing, is suitable for assembly line operation, and improves the degree of enterprise production automation. The drying air is at normal temperature, which effectively protects the color and quality of the material itself.
Construction configuration:
1) The whole machine is made of stainless steel (except for electrical components), which is easy to clean and meet the relevant regulations on food hygiene;
2) To ensure that the temperature error is small, a temperature sensor is used;
3) The tank body is made of 2mm stainless steel; the force-bearing part is made of 4mm stainless steel; the frame body is made of 50×50×3 stainless steel square pipe; the heat preservation outsourcing is made of 1mm stainless steel; the upper cover is made of 1.2mm stainless steel; the complete machine bearing and bearing seat are all Made of stainless steel;
4) Conveyor mesh belt reducer transmission system; there is an active motor in the middle of the equipment, and the front and rear deceleration motors adopt the conveying method of pulling forward and sending back. When running under force, the tensile force is reduced and the deformation is deformed, which increases the service life of the mesh belt
5) Adopt a regular frequency converter to adjust the stepping speed of the conveyor belt with high accuracy;
6) The whole machine is equipped with (φ108) cleaning holes, which can be flushed by extending the high-pressure water spray to the bottom of the equipment, which is convenient for cleaning and sanitation;
7) All the corners of the equipment chain adopt sprocket to turn to reduce the tension of the chain.
8) In order to make the control of the whole set of equipment convenient, this equipment is specially equipped with an independent control system, which is convenient for operation and maintenance and not easy to be wet.